Direct Selection of Tracks, Selecting by Time

Skip Forward / Backward

Press SKIP 9 or SKIP/STEP: during playback.

A track is skipped forward or backward each time the button is pressed.

When the SKIP 9 button is pressed once midway through a track, play returns to the start of that track. When it is pressed again in quick succession, a previous track is skipped each time the button is pressed.

Pause

Press PLAY/PAUSE once during playback.

The play suspends.

To return to normal play:

Press PLAY/PAUSE again.

Direct Selection of Tracks

Selecting by Time

You can play the audio CD starting from any time point you want.

Press SEARCH on the remote control during playback.

The time search box is displayed on the screen as TRACK TIME _ _ : _ _ : _ _ / xx : xx : xx

Enter the time using number buttons.

Player goes to the entered time of the current track.

Press SEARCH on the remote control two times during playback.

The time search box is displayed on the screen as DISC TIME _ _ : _ _ : _ _ / xx : xx : xx

Enter the time using number buttons.

Player goes to the entered time of the disc.

∞NOTE:

If you give up entering the time simply press RETURN, and the operation is cancelled.

•If you wait ten seconds without pressing any key for selecting tracks, the operation is cancelled.

Accessing tracks using number buttons

You can play any track you want, just by pressing the corresponding number button.

For the track numbers which are greater than “9” use +10 button. Each press increases the number by 10.Then type the second digit of track number.

If you attempt to enter a number greater than the total number of tracks on disc, ´ symbol is displayed on screen.

Repeat Play

Press PLAY MODE during playback.

Each time this button is pressed, a different repeat box is displayed on the screen.

If “REPEAT TRACK” is displayed, the current track will be played again.

If “REPEAT ALL” is displayed, the whole disc will be played again.

If “REPEAT OFF” is displayed, the repeat mode is disabled.

∞NOTE:

If the play list is active, the playlist is repeated instead of the whole disc in “Repeat All” case.

Repeating sections between two specific points.

(A – B repeat)

Press A-B RPT during playback at the point where repeat play is to commence (A).

“A TO B SET A” is displayed.

Press A-B RPT again at the point where repeat play is to be concluded (B).

“A TO B SET B” is displayed and the repeat-play of the selection between points A and B starts.

To return to normal play:

Press A-B RPT again. “A TO B CANCELLED” is displayed and the A-B Repeat is disabled.

∞NOTE:

If you give up entering the point B after entering A simply press RETURN, and the operation is cancelled.

Convenient Functions

Displaying the time information

Press TIME during playback.

Each time this button is pressed, an information box is displayed on TV screen to indicate the status of the time displayed on the VFD display.

If “SINGLE ELAPSED” is displayed, the VFD display on the unit shows the elapsed time for the track that is being played.

If “SINGLE REMAIN” is displayed, the VFD display on the unit shows the remaining time for the track which is being played.

- 24 -