Toshiba SD-R6112 specifications 22/28, ATA Command for Atapi DVD-ROM Devices, Power Requirements

ATA Command for ATAPI DVD-ROM Devices

N o .	OP Code	OP Code
-	00h	Nop
1	08h	ATAPI Soft Reset
2	20/21h	Read Sector (s)
3	90h	Execute Drive Diagnostics
4	A0h	ATAPI Packet Command
5	A1h	ATAPI Identify Device
6	E0h	Standby Immediate
7	E1h	Idle Immediate
8	E2h	Standby
9	E3h	Idle
10	E5h	Check Power Mode
11	E6h	Sleep
12	E7h	Flush Chache
13	ECh	ATA Identify Device
14	EFh	Set Feature

7. Power Requirements
7.1. Source Voltage	+5 V +/-5 % (Operating)
	+5 V +/-8 % (Start up)
7.1.1. Spike	100 mV (p-p)Max.
7.1.2. Ripple	100 mV (p-p)Max.
7.2. Current Drain (Typical value)	+5 V
7.2.1.Sleep	28 mA (DVD/CD)
7.2.2.Standby (Laser off, Motor off)	30 mA (DVD/CD)
7.2.3. Continuous Read (Data/Audio)	690 mA (DVD 3.3-8X)
	550 mA (CD 4-6X)
	735 mA (CD 10.3-24X)
7.2.4.Idle (Laser on, Motor on)	530 mA (DVD)
	530 mA (CD)
7.2.5. Average (20% Random Access)	710 mA (DVD 3.3-8X)
	720 mA (CD 10.3-24X)
7.2.6. Maximum (100% Random Access)	740 mA (DVD 3.3-8X)
	760 mA (CD 10.3-24X)

22/28 SD-R6112 Rev.1.0