Toshiba SD-M1401 user manual Cd-Da, Cd-Midi Cd-Text Cd-Rom Cd-Rom-Xa, Front Panel

Page 4

CD

CD-DA

CD+(E)G

CD-MIDI

CD-TEXT

CD-ROM

CD-ROM-XA

CD-I Bridge (Photo-CD, Video CD)

CD-I

Multi-session (Photo-CD, CD Extra, CD-RW, CD-R)

CD-R (Read)

CD-RW (Read)

Front Panel

Figure 1.SD-M1401 DVD-ROM Drive Front Panel

Loading Tray Load disc using tray.

Busy Indicator When you install a disc into the DVD-ROM drive, the BUSY light flashes slowly as it attempts to locate the disc. One of the following will occur:

BUSY light goes out. The DVD-ROM drive is ready to read data from the disc.

BUSY light flashes slowly. The disc may be dirty.

BUSY light remains ON. The DVD-ROM is accessing data.

BUSY light remains ON indefinitely. The DVD-ROM is experiencing an error

Eject

Button

Emergency Eject Hole

The Eject button is used to open the disc tray so you can install or remove a disc.

The emergency eject hole is to be used only when the Loading Tray will not open when Eject button is pressed.

Image 4 Contents
DVD-ROM Scsi Drive Contents Types of Disc Formats Supported DVDDVD DVD-ROM CD-DA CD-MIDI CD-TEXT CD-ROM CD-ROM-XAFront Panel Eject Button Emergency Eject HoleSetup SD-M1401 DVD-ROM Jumper SettingsConnecting Cables Placing DVD-ROM Drive inside your ComputerInstalling Audio Cable Completing Installation Mounting IllustrationDrive Operation Inserting a Disc Horizontally Inserting a Disc VerticallyUsage Guidelines Removing a DiscEmergency Ejection Cleaning Media Handling MediaTroubleshooting SD-M1401 SolutionSpecifications -SD-M1401 PerformanceDVD-ROM CD-ROM, CD-R CD-RW CD-DA CD-ROMReliability MtbfMttr AudioPower ConnectorsPhysical LasersDrive Connectors -SD-M1401 ConnectorInterface Pin Assignments
Related manuals
Manual 17 pages 21.52 Kb