Toshiba SD800KY manual Connecting to a display Using a Hdmitm cable, Press, About Hdmi

Connections

About HDMI

HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes, and other AV devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by DVI-compliant or HDMI-compliant displays.

HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multi-channel surround- sound audio. HDMI features included uncompressed digital video, a bandwidth of up to 2.2 gigabytes per second (with HDTV signals), one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

Connecting to a display (Using a HDMITM cable)

Available output signals are below:

•Auto

•576p/480p (progressive)

•720p (progressive)

•1080i (interlaced)

•1080p (progressive)

L

R

To HDMI

Output

HDMI Cable

(not supplied)

HDMI-compatible display

Switching the video quality (HDMI mode) using the HDMI button on the remote control or the HDMI SELECT button on the front panel.

Press HDMI button on the remote control or HDMI SELECT button on the front panel to receive a suitable video quality in STOP mode. The video quality is required to match your TV having HDMI feature and suitable quality. Please also check your TV owner’s manual.

Press this button to change the output signals as below. See the HDMI indicator and select the appropriate output signal.

HDMI indicator	Video output signal
illuminates “•1080p”	1080p (progressive)
Press
illuminates “1080i”•	1080i (interlaced)
Press
illuminates “720p”•	720p (progressive)
Press
illuminates “ • 576p/480p”	576p/480p (progressive)
Press
illuminates “ • 576p/480p,	Auto
• 720p, • 1080i and • 1080p”

Press

576p/480p, 720p, 1080i and 1080p are signals created with this DVD Player from original 576i/480i signal. The resolution of the picture may not be increased even if they are selected.

• Make the following setting.

On-screen display	Select:	Page
“Digital Output”	“PCM”	33
“Video Out”	HDMI	32

Notes

•Refer to the owner’s manual of the connected TV as well.

•When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.

•If you have a HDMI (with HDCP) equipped monitor or display, you can connect it to this player using a HDMI cable.

•The HDMI connector outputs uncompressed digital video, as well as almost every kind of digital audio that the player is compatible with, including DVD-Video, Video CD/Super VCD, CD, MP3 and DivX® .

•This unit has been designed to be compliant with HDMI (High Definition Multimedia Interface) depending on the component you have connected. Using a HDMI connection may result in unreliable signal transfers.

•Because HDMI is an evolving technology, it is possible that some devices with an HDMI input may not operate properly with this DVD player.

•When using HDMI cable, do not connect to other analogue video outputs.

•No sound will be output from the HDMI cable if the digital out is not set to PCM.

•HDMI output is only available when the Video Out is set to “HDMI”. Otherwise the HDMI button is invalid.

12