Toshiba SD800KY manual Jpeg Interval, Digital Output, Night Mode

JPEG Interval

1)	Press SETUP button.
2)	Press	/ button to select the Video.
3)	Press	button, then the / button to select the JPEG
	Interval.
4)	Press ENTER button, then the / button to shift and
	change the JPEG Interval.

5)Press ENTER button.

6)Press SETUP button to exit the menu.

Aspect Ratio	: 16 : 9
	: Auto Fit
TV System	: PAL
Video Out	: HDMI
HDMI Resolution	Off
HD JPEG Mode	5 seconds
	10 seconds
JPEG Interval
	15 seconds

Off: Plays back one file at a time.

5 seconds: Plays back images in the form of a slide show at 5 seconds interval.

10 seconds: Plays back images in the form of a slide

show at 10 seconds interval.

15 seconds: Plays back images in the form of a slide show at 15 seconds interval.

Audio	: PCM
	: Off

Digital Output

Selects the output sound format corresponding to your system connection.

1)Press SETUP button.

2)Press / button to select Audio.

3)Press button, then use the / button to select Digital Output.

4)Press ENTER button, then use the / button to select the output sound format.

5)Press ENTER button.

6)Press SETUP button to exit the menu.

PCM: Select when connected to a Multi-channel digital stereo amplifier.The DVD player outputs sound in the PCM stereo format when you play a DVD recorded on the Dolby Digital, MPEG1 or MPEG2 recording system.

Bitstream: Disc audio raw data will be output. Select “Bitstream” if your amplifier supports “DTS”.

Off: To disable Digital Output.

Off

PCM

Bitstream

Notes

•When you make a connection to a TV, Dolby Surround Pro Logic or stereo system via the analogue audio jacks, select “PCM” or “Bitstream”.

•If this DVD player is connected to a TV using HDMI, make sure to select “PCM”.

Night Mode

Night mode is equivalent to Dynamic Range Compress. When it is On, it reduces the variations between loud and soft sounds in audio output.You can still hear softer sounds and dialog even in very low volume.

1)	Press SETUP button.
2)	Press	/ button to select Audio.
3)	Press	button, then use the /	button to select
	Night Mode.
4)	Press ENTER button, then use the		/ button to
	select the On or Off mode.

5)Press ENTER button.

6)Press SETUP button to exit the menu.

: PCM

Off

On

Note

Night mode is Dynamic Range Control (DRC) option for analogue audio output.

Function setup

33