Connections
Connecting to television
IMPORTANT!
–You only need to make one video connection from the following options, depending on the capabilities of your television.
–Connect the DVD player directly to the television.
Using Composite Video Jack(CVBS)
AUse the composite video cable (yellow) to connect the DVD player' s VIDEO(CVBS) jack to the video input jack(or labeled as A/V in, Video In or Composite) on the TV(cable supplied).
To hear the sound of this DVD player through your TV, use the audio cables(white/red)to connect AUDIO OUT(L/R)jacks of the DVD player to corresponding AUDIO IN jacks on the TV(cable supplied).
Using Component Video Jacks(Y, PB, PR)
IMPORTANT!
AUse the component video cables (red/blue/green) to connect the DVD player' s Y, PB, PR jacks to the
corresponding Component video input jacks (or labeled as Y, Pb, Pr) on the TV (cable not supplied).
BUse the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD player to the corresponding AUDIO IN jacks on the TV (cable not supplied).
CProceed to page 11 for detailed Progressive Scan set up.
Using a RF modulator
IMPORTANT!
AUse the composite video cable (yellow) to connect the DVD player' s VIDEO (CVBS) jack to the video input jack on the RF modulator (cable supplied).
To hear the sound of this DVD player through your TV, use the audio cables(white/red) to connect AUDIO OUT (L/R) jacks of the DVD player to the corresponding AUDIO IN jacks on the RF modulator (cable supplied).
BUse the RF coaxial cable (not supplied) to connect ANTENNA OUT or TO TV jack on the RF modulator to the ANTENNA IN jack on the television.
CConnect the Antenna or Cable TV service signal to the ANTENNA IN or RF IN jack on the RF modulator. (It may have been connected to your TV previously. Disconnect it from the TV.)
English
Helpful hint: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.