Advanced playback
Selecting the Sound Enhancement (E.A.M.*)
You can easily switch the sound enhancement to your preference. |
|
|
*E.A.M.: Enhanced Audio Mode | 2 | � |
| ENTER |
|
1, 2
DVD Selecting the sound enhancement
1 Press E.A.M.
To exit the audio enhancement selection
Press ENTER.
E.A.M. | The sound enhancement selection |
| appears. |
ENTER
Notes
Alternatively leave the DVD video player unoperated for about 5 seconds after having made the selection.
2 Select the sound enhancement by pressing E.A.M. or / .
Each time you press the button, the sound enhancement changes.
Normal:
Normal sound.
3D*:
To obtain expansive virtual surround sound effects from just two speakers.
Dialogue*:
To control dynamic range to make dialogues easier to hear.
•To use this enhancement on sounds output from the
BITSTREAM/PCM AUDIO OUT jack, be sure to set “Audio Out Select” to “PCM”. 61
*Effective only during playback of Dolby Digital recorded discs.
•Actual effects to sounds may vary depending on the speakers. Make the selection to your preference.
•Actual effects to sounds may vary depending on the disc.
•When the DVD video player is connected to an amplifier equipped with Dolby Surround Pro Logic, select “Normal”. Otherwise, Dolby Surround Pro Logic may function differently than usual.
•Selecting “Dialogue” disables “Dynamic Range Control” function 61 .
Manufactured under license from QSound Labs, Inc. U.S. patent Nos. 5,105,462, 5,208,860 and 5,440,638 and various foreign counterpart. Copyright QSound Labs, Inc.
40