Aspect Ratio, View Mode, TV System, Video Out

DVD Menu Options

Language	Aspect Ratio	: 4:3
	View Mode	:Auto Fit
Video	TV System	: PAL
	Video Out	:Component
Audio	Smart Picture	:Standard
Rating
Misc

B	Press	/	to select { Video }, then press
C Press		/	to select an item, then press to
	access.
	Example: { Video Out }
	The options for the selected item appears.

If the selection in the menu is greyed out, that means the feature is not available or not possible to change at the current state.

D Use / to select a setting and press OK to conﬁrm.

Example: { P-Scan}

The setting is selected and setup is completed.

ETo exit, press SETUP.

Aspect Ratio

The picture shape can be adjusted to ﬁt your TV and the format must be available on the playback disc. Otherwise, the TV display will not affect the picture during playback.

A In ' Video ', press / to select { Aspect Ratio }, then press .

{4:3 }

Select this if you have a normal TV. A 'wide-screen' source display with black bars on the top and bottom will be displayed on the TV screen.

{16:9 }

Select this for wide-screen TV (frame ratio 16:9). B Use / to select a setting and press OK to

conﬁrm.

View Mode

Use view mode to scale an image that ﬁts to the TV screen's width and height.

A In ' Video ', press / to select { View Mode }, then press .

{Fill }

Fill the screen with decoded image.

{Original }

Display image as its original size.

{Height Fit }

Fit the screen height with image height.

{Width Fit }

Fit the screen width with image width.

{Auto Fit }

Automatically display the decoded image on screen at a suitable size.

{Pan Scan }

Automatically display decoded image on full screen without distortion.

B Use / to select a setting and press OK to conﬁrm.

Tip:

-Depending on the type of disc, you may not be able to view the mode as selected.

Helpful hint: Press to go back to previous menu item. Press SETUP to exit the menu item.

TV System

The video standard of the DVD player output can be selected from “NTSC”, “PAL” or “Multi”.

{NTSC }: Select if your TV system is NTSC.

{PAL }: Select if your TV system is PAL.

{Multi }: The DVD video player automatically identiﬁes PAL or NTSC video system of a disc. Connect a multisystem TV (PAL/NTSC compatible) to view a picture.

A playback picture may be distorted when detected a signal change between PAL and NTSC on the disc. For the case of Progressive mode, your multisystem TV must be able to support 525p and 625p.

Video Out

The video output of the DVD player can be selected as “Component” or “P-Scan”.

A In ' Video ', press / to select { Video Out }, then press .

{Component }

Select this for component video connection.

{P-Scan }

Select this when you connect your DVD player to your TV, which has component video inputs that supports progressive scan.

B Use / to select a setting and press OK to con- ﬁrm.

Smart Picture

This DVD player provides four predeﬁned sets of picture color settings.

A In ' Video ', press / to select {Smart Picture }, then press .

{Standard }

Select this for a preset standard picture setting.

{Vivid }

Select this to make the picture brighter.

{Cool }

Select this to make the picture softer.

{Personal }

Select this to personalize your picture color by adjusting the brightness, contrast, tint and color (saturation).

B Use / to select a setting and press OK to conﬁrm.

CIf you select { Personal }, then proceed to steps D~G.

The setup menu appears.

Brightness			0
Contrast			0
			0
Tint
			0
Color
			Close
D Press	/	to highlight one of the following options.

Brightness

Increase the value to brighten the picture or vice versa. Choose zero (0) for average setting.

Contrast

Increase the value to sharpen the picture or vice versa. Choose zero (0) to balance the contrast.

Tint

Toshiba SD-590KY manual Aspect Ratio, View Mode, TV System, Video Out, Smart Picture