Toshiba SD-590KY manual Receiver has a PCM, Dolby Digital or Mpeg decoder

Connections

Connecting to a Stereo System Connecting to a Digital AV Receiver

English

MAINS

Stereo system has Dolby Pro Logic or Right/Left Audio In Jacks

ASelect one of the video connections (CVBS VIDEO IN or COMPONENT VIDEO IN)

depending on the options available on your TV.

BUse the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the stereo system (cable not supplied).

Receiver has a PCM, Dolby Digital or MPEG decoder

ASelect one of the video connections (CVBS VIDEO IN or COMPONENT VIDEO IN)

depending on the options available on your TV.

BConnect the COAXIAL jack of the DVD player to the corresponding Digital Audio In jack on your Receiver

(cable not supplied).

CSet the DVD Player' s Digital Output to PCM or All depending on the capabilities of your Receiver (see page 19 {Digital Output}).

Tip:

-If the audio format of the Digital Output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

Helpful hint: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.

7