Connections
nnecting to a TV
Connect the DVD video player to your TV. For details of output sound, see 
42
.
Signal Flow
To S VIDEO OUT
(yellow) 
(red) 
(white)
To wall outlet
To VIDEO | To ANALOG AUDIO OUT |
|
|
|
|
| |
OUT | Audio/video cable (supplied) | To audio inputs | |
| |||
| To video input | (red) | (white) |
| (yellow) | ||
|
|
| |
S video cable (not supplied) | To S video input |
|
If the TV has an S video input, connect the DVD video player with an S video cable. When using an
S video cable, do not connect the yellow video cable.
TV or monitor with audio/video inputs
● Making the following setting.
Notes
● Refer to the owner’s manual of the connected TV as well.
Select: | Page | |
|
|
|
“Digital Output” | “Bitstream” | 56 |
or | 60 | |
| “PCM” | |
|
|
|
“Video Output” | CVBS | 59 |
|
|
|
●When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.
●If your TV has one audio input, connect the left and right audio outputs of the DVD video player to a Y cable adapter (not supplied) and then connect to your TV
●connect the DVD player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination or video selector, playback picture may be distorted as DVD video discs are copy protected.
●Analog audio out will not have sound DTS playback.
18