Connections
Connecting to a TV (Continued)
About HDMI
HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV,
HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by
HDMI has the capability to support standard, enhanced, or
HDMI, the HDMI logo and
Connecting to a display (Using the HDMI cable)
To HDMI
OUT
HDMI Cable (supplied)
Switching the video quality (HDMI mode) using HDMI button on the remote control or SELECT button on the Front Panel
In standby mode, select HDMI mode through the ANALOG/HDMI switch on the front panel.
Press HDMI button on the remote control or SELECT button on the front panel to receive suitable video quality. The video quality is required to match your TV having HDMI feature and suitable quality, please check your TV owner’s manual.
Pressing the HDMI button or SELECT button changes the video
quality as follows:
480p 720p 1080i 1024p
both TV and DVD display 13 will show your selected video quality within 2 seconds.
HDMI-compatible
display
• Make the following setting.
Select: | Page | |
|
|
|
“Digital Out” | “PCM” | 50 55 |
|
|
|
Notes
•Refer to the owner’s manual of the connected TV as well.
•When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.
•Select HDMI mode through the ANALOG/HDMI switch of front panel, analog video out jack (Yellow) will not have video signal.
•If you have a HDMI (with HDCP) equipped monitor or display, you can connect it to this player using the supplied HDMI cable.
•The HDMI connector outputs uncompressed digital video, as well as almost every kind of digital audio that the player is compatible with, including
•When using HDMI cable, do not connect to other analog video outputs.
•No sound will be output from the HDMI cable if the Digital Out is not set to PCM. 55
20