Connecting the FM and AM(MW/LW) Antennas
Connecting the Optical Equipment
1 | 2 | 3 | If AM reception is |
|
|
| poor, connect an |
|
|
| outdoor AM |
antenna(not supplied).
AM Loop Antenna
(supplied)
ANTENNA
If FM reception is poor,
connect an outdoor FM antenna (not supplied).
FM Antenna (supplied) | Snap the tabs on the loop into the |
| slots of the base to assemble the |
| AM loop antenna. |
External Digital
Components
For connection to external equipment with digital output.
Example: CD recorders, MD (Mini Disc) D/A converters or other components equipped with digital output jacks
(not supplied) |
Optical Cable |
TV
To view pictures from external input (AUX 1 , AUX 2 ), first connect the
VIDEO IN VIDEO IN jack and then connect the VIDEO OUT jack.
CONNECTIONS
| Cooling fan (See “About Cooling Fan” below.) | ||
FM antenna connection |
|
| AM(MW/LW) antenna connection |
|
| ||
|
|
|
|
Audio Cable (Red/White) |
|
|
If the external analog |
| Video Cable (Yellow) |
component has only one |
| |
output jack, you may connect |
|
|
either L or R. |
|
|
External Analog
Components
1.Connect the FM antenna supplied to the FM 75 
COAXIAL terminal as temporary measure.
2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
•If reception is poor, connect an outdoor antenna. Before attaching a 75
coaxial cable (with a standard type connector), disconnect the supplied FM antenna.
1.Connect the AM loop antenna supplied to the AM and 
terminals.
2.If reception is poor, connect an outdoor single
R | L | VIDEO OUT |
Connect to external equipment with analog output.
Example: VCR, TV, etc.
Warning • Always connect the video and audio connection cables to the equivalent colored jack.
To Play External Digital/Analog Equipment
(About the cooling fan) |
| For safety, observe the following carefully. |
|
| |
A cooling fan is mounted on the rear panel of the center unit to | • Make sure there is good ventilation around the center unit. Poor | |
prevent abnormal temperature inside the center unit, thus assuring | ventilation could overheat and cause damage. | |
normal operation. The cooling fan automatically starts rotating to | • DO NOT block the cooling fan and the ventilation openings or | |
supply external cool air to the inside of the center unit when the | holes. (If they are blocked by a newspaper or cloth, etc., the heat | |
internal temperature exceeds the specified limit. | may not be able to escape.) | |
|
|
|
Press AUX on the remote control to select DIGITAL IN, AUX1, or AUX2. Press Function on the main unit to select DIGITAL IN, AUX1, or AUX2.
•Each time the button is pressed the mode switches as follows: FM ➞ AM ➞ DVD/CD ➞ DIGITAL IN ➞ AUX 1 ➞ AUX 2.
11 | 12 |