Toshiba SD-260E ES manual Audio CD Playback, Repeating a section between two specific points

Repeating a section between two specific points

(A – B repeat)

Press A-B RPT during playback at the point where repeat play is to commence (A).

“A TO B SET A” is displayed on screen.

Press A-B RPT again at the point where repeat play is to be concluded (B).

“A TO B SET B” is displayed and the repeat-play of the selection between points A and B starts.

To return to normal play:

Press A-B RPT again. “A TO B CANCELLED” is displayed and the A-B Repeat is disabled.

¥NOTE:

•If you give up entering the point B after entering point A simply press RETURN, and the operation is cancelled.

CONVENIENT FUNCTIONS

Displaying the time information

Press TIME during playback.

Each time this button is pressed, a different time information box is displayed on the screen.

If “SINGLE ELAPSED” is displayed, the VFD display on the unit shows the elapsed time for the track which is being played.

If “SINGLE REMAIN” is displayed, the VFD display on the unit shows the remaining time for the track which is being played.

Displaying a scene with a larger and closer view

ZOOM function enables you to take a closer look at the scene you are viewing.

This is especially useful when you are watching a science fiction or an adventure film.

Press ZOOM during playback.

You can change the zooming ratio by pressing ZOOM button several times.

¥NOTE:

•You can move to any area of the enlarged screen by using the 3/4/6/5 arrow buttons.

To return to normal play:

Press ZOOM several times until “ZOOM OFF” is displayed on the screen.

AUDIO CD PLAYBACK

Preparations

Turn on your audio system if the player is connected to an audio system.

Basic Play

1.Press ON/STANDBY button.

2.Press OPEN/CLOSE () to open the disc tray.

3.Place a disc onto the tray

4.Press OPEN/CLOSE () .

Play is commenced.

After operation

When the unit is not in use, remove the disc and press

ON/STANDBY to turn the unit to standby mode.

¥NOTE:

•If the disc is placed upside down ( and it is a single sided disc), TV screen will display either “NO DISC” or “DISC ERROR”.

For your reference:

W hen “ appears while a button is being pressed, it means that the corresponding operation is prohibited by the player .

Stopping Play

To stop the play permanently, press STOP (<) twice. When the STOP (<) button is pressed once, a message “PRESS PLAY TO CONTINUE” will appear on the screen to remind you if you want to continue the play. To stop the play, press the STOP (<) button again or you can press PLAY/ PAUSE to continue playback.

Fast Forward / Reverse

Press FWD 8 or REV 7 during playback.

The speed of advance or reverse changes for every press of the FWD or REV button.

Normal play is resumed when PLAY/PAUSE button is pressed.

¥NOTE:

No sound will be heard during rapid advance or rapid reverse.

Skip Forward / Backward

Press SKIP/STEP: or SKIP 9 during playback.

- 25 - ENG