Preparation (continued)
E: Ethernet
Perform this setting if you connect the player to your LAN 
page 17).
After performing this setting, you need to turn off this player and turn it on again to activate this setting. If you do not connect, skip to Step 20.
18 | Press | / | to select “Ethernet”, then press OK. |
19 | Press | / | to select each of the followings, then press OK. |
DHCP | Off |
|
|
Proxy Setting | Off |
|
|
Mac Address | Off |
|
|
NTP Server | Off |
|
|
Network Speed | 56kbps Modem |
|
|
Cookie Setting | Accept |
1To set your network information.
2To input proxy server address (when your provider requires the setting). To display the Mac address of the player. (Fixed. No need to set.)
3To adjust the player’s clock via the network time protocol.
4To select the speed according to the specification of your LAN.
5To select whether you access “Cookies” or not.
1DHCP
1Set “DHCP” to “On” and press OK button.
The network information is automatically set.
DHCP
IP Address
Subnet Mask
Gateway
DHCP
On | Off |
0 . 0 . 0 . 0
0 . 0 . 0 . 0
0 . 0 . 0 . 0
2Proxy Setting
Enter the proxy server address when your provider requires proxy setting.
Proxy Setting
1 Set “Proxy” to “On” and |
|
|
|
press OK button. | Proxy | On | Off |
|
|
| |
| Server |
| |
2Set “DNS” to “On” and press OK button.
The DNS server is obtained automatically from the DHCP server.
3Select “Confirm”, then press OK button. Confirming starts.
If the setup is successful, an IP address appears. Press OK button.
Skipped when “DHCP” is set to “On”.
Gateway | 0 | . | 0 . | 0 . | 0 |
DNS |
| On |
| Off |
|
DNS Server | 0 | . | 0 . | 0 . | 0 |
Confirm |
|
|
| ||
OK |
| Cancel |
|
| |
Skipped when “DNS” is set to “On”.
2 Enter the specified data | Port | 0 |
|
|
|
| |
|
|
|
|
|
| ||
from the provider. |
| OK |
| Cancel |
| ||
Refer to the instructions |
|
|
|
|
|
| |
below for inputting | 3 Select “OK” and press | ||||||
characters. (Server, Port) | OK button. | ||||||
|
| ||||||
| How to input characters | ||||||
|
| ||||||
OK button | To begin or finish input. | ||||||
If the setup is not successful:
a) Set “DHCP” to “Off” and |
| DHCP |
|
|
| ||||
|
|
|
|
|
|
|
|
| |
press OK button. | DHCP | On |
|
| Off |
| |||
IP Address |
|
|
|
|
|
|
|
| |
The network information is | 192 | . | 168 | 1 | . | 15 | |||
|
|
|
|
|
|
|
|
| |
automatically set. | Subnet Mask | 255 | . | 255 | 255 | . | 0 | ||
|
|
|
|
|
| ||||
| Gateway | 192 | . | 168 | 1 | . | 1 | ||
|
|
|
|
| |||||
| DNS | On |
|
| Off |
| |||
| DNS Server |
|
|
|
|
|
|
|
|
| 192 | . | 168 | 1 | . | 1 | |||
|
|
|
|
|
|
| |||
|
| Confirm |
|
|
| ||||
/ | buttons | To select a character. |
/ | buttons | To move to the next character. |
|
| |
CLEAR button | To erase to correct. | |
|
| |
Number buttons | To input a number. | |
b) Input the addresses using the number buttons.
OK Cancel
“IP Address” This sets a different address within the same subnet of the PC on your network. e.g. if the IP address of the PC is
192.168.1.10, set 192.168.1.15 (or some other unused address.)
“Subnet Mask” This sets the subnet mask of the network environment that will be connected. e.g.: 255.255.255.0
“Gateway” This sets the gateway used by the player (e.g.: 192.168.1.1).
“DNS Server” This sets the DNS server to be used by the
player (e.g.: 192.168.1.1).
3 NTP Server
Select “On” or “Off” and press OK button.
“On” The player automatically accesses an internet server to adjust time protocol.
“Off” The player does not access an internet server
to adjust its clock.
NTP Server
On
Off
c) Select “OK” and press OK button.
22