Blink out the Current Code
If you have set up your TOTAL CONTROL via the Search Method, you can blink back your code for future reference.
Example: To blink out your television code:
1Press the TV key on your TOTAL CONTROL.
TV
2Press and hold down the SET key until the red light blinks twice.
SET
3Press 9 9 0, the red light will blink twice.
9
9
0
4For the first digit of your
count all the red blinks. If there are no blinks, the digit is "0".
5For the second digit, press 2 and count all the red blinks.
6For the third digit, press 3 and count all the red blinks.
7For the fourth digit, press 4 and count all the red blinks.
-To blink back the code for your other devices follow the instructions above, only press the appropriate device key during step 1.
Quick Code Reference
Write down the codes for your devices in the boxes below and in the battery compartment for quick and easy reference.
Device type | Code |
1 | ■ ■ ■ ■ |
2 | ■ ■ ■ ■ |
3 | ■ ■ ■ ■ |
4 | ■ ■ ■ ■ |
1
2
3
4
8