Toshiba MD14F51 owner manual To memorize channels, TV/CABLE selection Automatic memory tuning

To memorize channels

This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV/DVD’s memory. In addition to normal VHF and UHF channels, this TV/ DVD can receive up to 113 Cable TV channels. To use this TV/DVD with an antenna, set the TV/CABLE selection to the TV position. When shipped from the factory, this selection is in the CABLE position.

0–9

// /

MENU

TV/CABLE selection Automatic memory tuning

1	Press MENU in the TV mode, then press			or
	to select	option.	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿	￿￿￿￿￿
			￿￿￿￿￿￿￿￿	￿￿￿￿￿
2 Press or			￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
		to select “TV/CABLE”.

￿￿￿￿￿￿￿￿

3 Press or to select “TV” or “CABLE”. TV - VHF/UHF channels

CABLE - Cable TV channels￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

4 Press MENU repeatedly until the menu screen is cleared.

Cable TV chart

The chart below is typical of many cable system channel allocations.

Press or	to select the “AUTO CH MEMORY”,
then press .
The TV will begin memorizing all the channels
available in your area.		￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿		￿￿￿￿￿
					TV
		￿￿	￿￿￿￿￿		operation
To ADD/DELETE channels
Press or	to select “ADD/DELETE”, then
1press .		￿￿￿￿	￿￿￿￿￿￿	￿￿￿￿￿
		￿￿￿￿￿￿￿￿￿￿
		￿￿￿￿￿￿￿

2 Select the desired channel to be added or deleted using Direct channel selection buttons (0–9) or / .

3 Press or to select “ADD” or “DELETE”, whichever function you want to perform.

ADD CH 001

0-9 / //// MENU

23

5S00101B [E] (P13-23) 23 2/23/05, 5:38 PM