Connecting TV/DVD
Connecting a PC (personal computer)
Before you connect this TV/DVD to your PC, change the adjustment of your PC’s Resolution and Refresh rate. See “Monitor display modes” on right.
Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC at the side of the TV/DVD. Fix the connectors firmly with the screws on the plug. In case of a Multimedia computer, connect the audio cables to the audio outputs of your Multimedia computer and to the AUDIO L and R connectors of the PC IN jacks of the TV/DVD.
Set the video input source to PC mode (see “Selecting the video input source” on page 31 and “Picture/Audio adjustments in the PC mode” on page 43). The TV/DVD can be used as a computer monitor.
You will need:
•one VGA
•one PC audio cable
Monitor display modes
Mode | Resolution | Refresh rate |
VGA | 640x480 | 60Hz |
VGA | 720x400 | 70Hz |
WVGA | 848x480 | 60Hz |
SVGA | 800x600 | 60Hz |
XGA | 1024x768 | 60Hz |
WXGA | 1280x720 | 60Hz |
WXGA | 1280x768 | 60Hz |
WXGA | 1360x768 | 60Hz |
your
Computer
Audio output
Audio cable
Conversion adapter (if necessary)
TV/DVD back panel
Note:
•Some PC models cannot be connected to this TV/DVD.
•An adapter is not needed for computers with a DOS/V compatible mini
•The
•If your PC display output corresponds to a WVGA or a WXGA resolution as indicated in the chart above (example: WXGA 1360 x 768), you must set the WVGA INPUT or WXGA INPUT to the ON position in the PC Picture menu in the TV (see page 43).
NOTE: DO NOT CONNECT A
PC USING THE HDMI INPUT.
ALWAYS use the VGA port provided to connect a PC.
20
20 | 21/4/06, 12:11 PM |