Toshiba 23HLV86 Adding channels to the TV/DVD’s memory, Programming channels automatically

Adding channels to the TV/DVD’s memory

When you press CH M / ?, your TV/DVD will stop only on the channels you have stored in the TV/DVD’s channel memory. Follow the steps below to program channels into the channel memory.

Programming channels automatically

Your TV/DVD can automatically detect all active channels and store them in its memory. After the TV/DVD has stored the channels in its memory automatically, you can add or erase channels manually.

To add channels automatically:

1.Press MENU, then press or to display the SETUP menu.

2.Press ▲ or ▼ until the TV/CABLE

			selection is highlighted.
		3.	Press	or	to highlight either	S E T U P
						L A N G U A G E	ENGLISH
			TV or CABLE, depending on
						CLOCK SET	12:00AM
			which you use.			TV / CABLE	TV /	CABLE
						CH PROGRAM
						ADD / ERASE	ADD
			If you use an antenna, choose TV.			:SELECT	:ADJUST
			If you use cable, choose CABLE.
		4.	Press ▼ until the CH PROGRAM selection is highlighted.
		5.	Press	or	to start channel programming. The TV/DVD will
			automatically cycle through all the TV or Cable channels
	yourTV/DVD		(depending on which you selected), and store all active channels
Settingup			in the channel memory.
			While the TV/DVD is cycling through the channels, the message
			“PROGRAMMING NOW PLEASE WAIT” appears.
		6.	When channel programming is complete, the message “COMPLETED”
		7.	appears.
			Press CH M / ? to view the programmed channels.

Adding and erasing channels manually

After you have programmed the channels automatically, you can add or erase specific channels manually.

To add or erase channels manually:

1.Select the channel you want to add or erase. If adding channels, you must select the channel to add using the Channel Number buttons.

2.	Press MENU, then press or to display the SETUP menu.
3.	Press ▲ or ▼ to highlight ADD/				￿￿
	want to perform.	￿￿￿￿￿￿￿￿￿￿			￿￿￿￿￿￿￿￿￿
	ERASE.		￿￿ ￿￿
4.	Press or to select ADD or			￿￿￿	￿￿￿￿
	ERASE, whichever function you
5.	Repeat steps 1-4 for other channels		￿￿￿￿￿￿￿		￿￿￿￿￿￿￿
	you want to add or erase.

Changing channels

To change to the next programmed channel:

Press CHANNEL M / ? on the TV/DVD or CH M / ? on the remote control.

To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0-9 and 100) on the remote control. For example, to select channel 125, press 100, 2, 5.

Game mode

After connecting a TV Game to the unit, press GAME. The TV screen changes to the Game mode.

•The Game mode screen is adjusted to the suitable brightness for your eyes.

•If GAME is pressed during standby mode, the unit turns on automatically and the Game mode screen appears on the screen.

24

Channel

Numbers

CH M/?

MENU

GAME

In addition to cycling through your programmed channels, the CH M/? buttons will also cycle through the video input sources (page 31) in the order illustrated below.

￿￿ ￿￿￿￿ ￿￿￿￿￿￿￿￿￿￿￿￿￿ ￿￿￿

5X60301A(E)P22-25 24 21/4/06, 12:12 PM