Connections
Connecting to optional equipment (Continued)
You can enjoy high quality dynamic sounds by connecting the * This section uses the following reference mark.
TV/DVD to optional audio equipment. |
| ||
|
| : Front speaker | : Center speaker |
|
| : Rear speaker | : Signal flow |
|
| ||
|
| : Sub woofer |
|
Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs encoded via the Dolby Digital recording system with this dynamic realistic sound by connecting the TV/DVD to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full
Illustration of MD24F51
Amplifier equipped with a
Dolby Digital decoder
To COAXIAL |
|
type digital |
|
audio input | 75 Ω coaxial cable (not supplied) |
•Use DVD video discs encoded via the Dolby Digital recording system.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the
Connecting to an amplifier equipped with Dolby Surround Pro Logic
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left front speakers, a center speaker, and one or two rear speakers).
3
3
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an amplifier equipped with a Dolby Digital decoder.” Refer to that amplifier’s owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.
With an amplifier not equipped with Dolby Digital Connect the equipment as follows.
• This connection is only suitable for Video CDs and Audio CDs.
*
Amplifier equipped with
Dolby Surround Pro Logic
To COAXIAL |
|
type digital | 75 Ω coaxial cable (not supplied) |
audio input |
Illustration of MD24F51
*Connect one or two rear speak- ers. The output sound from the rear speakers will be monaural even if you connect two rear speakers.
Connecting to an amplifier equipped with a DTS decoder
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs. If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD video discs or audio CDs.
Amplifier equipped with
a DTS decoder
To COAXIAL type digital
audio input 75 Ω coaxial cable (not supplied)
•Use DVD video discs encoded via the Dolby Digital recording system.
“DTS” and “DTS Digital Out” are registered trademarks of Digital Theater Systems, Inc.
16
5S10101A [E] | 16 | 2/5/05, 9:41 AM |