Toshiba 20HLV86 appendix Selecting the video input source, Labeling the video input sources

Page 31

Selecting the video input source

Introduction

Press INPUT to view a signal from another device connected to your TV/ DVD, such as a VCR or DVD player. You can select ANT, VIDEO-1, VIDEO- 2, ColorStream HD, HDMI or PC, depending on which input jacks you used to connect your devices (see “Connecting your TV/DVD” on page 11).

SOURCE SELECTION

0 . ANT

1 . VIDEO1

2 . VIDEO2

3 . ColorStream HD

4 . HDMI

5 . PC

[0 - 5] : SELECT

Press INPUT on the remote control to display the current signal source (press INPUT again or 0-5 to change)

Please note the following regarding the HDMI source selection:

NOTE: DO NOT CONNECT A

PC USING THE HDMI INPUT.

ALWAYS use the VGA port provided to connect a PC.

See “Connecting an HDMI™ or DVI device” on page 17 and “Connecting a

your

You also can use￿￿￿￿￿￿￿￿￿￿￿￿the CH￿￿￿￿M￿￿￿￿￿￿￿￿/ ? ￿￿￿￿￿￿￿￿￿￿￿￿￿￿buttons to select￿￿￿￿￿￿the video input source. In addition to cycling through your programmed channels

(page 24), the CH M / ? buttons will also cycle through the video input sources, in the order illustrated below.

Labeling the video input sources

The video label feature allows you to label each input source for your TV/DVD from the following preset list of labels:

–: Uses the default label name VCR : Video cassette recorder DVD : DVD video

DTV : Digital TV set-top box

SAT : Satellite box

CBL : Cable box

HD : HDMI equipment

PC (personal computer)” on page 20 for details.

INPUT

TV/DVDConnecting

your TV/DVDSetting up

To label the video input sources:

1.Press MENU, then press or to display the OPTION menu.

2.Press ▲ or ▼ to highlight VIDEO LABEL.

3.Press or to display the VIDEO LABEL menu.

4.Press ▲ or ▼ to highlight the video source you want to label.

5.Press or to select the desired label for that input source.

6.Press EXIT to return to normal viewing.

Setting the clock

OPTION

 

ON TIMER

OFF / OFF / SET

FAVORITE CH

 

CH LABEL

 

VIDEO LABEL

 

:SELECT

:ADJUST

VIDEO LABEL

 

 

 

1

. VIDEO1

 

- / VCR / DVD / DTV

2

. VIDEO2

 

-

SAT / CBL

3

. ColorStream

HD

-

 

4

. HDMI

 

-

 

 

:SELECT

 

 

:ADJUST

EXIT

MENU

TV/DVD’s FeaturesUsing the

DVD

You must set the clock before you can program the ON timer.

To set the clock: (Example: 8:30 AM)

1.Press MENU, then press or to display the SETUP menu.

2.Press ▲ or ▼ to highlight CLOCK SET.

3.Press or to highlight the hour position.

4.Press ▲ or ▼ to set the hour, then press to highlight the minute position.

5.Press ▲ or ▼ to set the minutes, then press EXIT to return to normal viewing.

SETUP

 

LANGUAGE

ENGLISH

CLOCK SET

12 :00AM

TV / CABLE

CABLE

CH PROGRAM

 

ADD / ERASE

ADD

:SELECT

:ADJUST

SETUP

 

LANGUAGE

ENGLISH

CLOCK SET

8: 30 AM

TV / CABLE

CABLE

CH PROGRAM

 

ADD / ERASE

ADD

:SELECT

:ADJUST

Note:

If the power source for the TV/DVD is interrupted (for example, the power cord is unplugged or a power failure occurs), you will need to reset the clock.

Playback

Appendix

31

5X20301A(E)P31-32

31

13/3/06, 7:15 PM

Page 30 Page 32
Image 31
Page 30 Page 32
Contents 20HLV86 Child Safety FCC Declaration of Conformity Compliance Statement Part FCC compliance informationImportant Safety Instructions Important SafeguardsCare Important notes about your LCD TV PrecautionsOn storing discs Structure of disc contentsOn cleaning discs On handling discsPlayable discs On Video CDsContents Back Back panel Remote control Front Right sideExploring your new TV/DVD Top panelSelecting a location for the TV/DVD Connecting a VCRStereo VCR Option 1 For Subscribers to Basic Cable TV Service Connecting a cable converter box or AntennaOption 2 For Subscribers to Scrambled Cable TV Service Stereo VCR Connecting a satellite receiver and a VCRFrom Antenna From Antenna Connecting YourTV/DVD Connecting a camcorderTo connect an Hdmi device, you will need Connecting an Hdmi or a DVI deviceTo connect a DVI device, you will need Dolby Digital Connecting an amplifier equipped with a DTS decoderDigital Theater Systems DTS Channel digital stereo Connecting an amplifier equipped with an Mpeg audio decoderConnecting an amplifier equipped with a digital audio input MPEG2 soundMonitor display modes Connecting a PC personal computerTo install the batteries Installing the remote control batteriesLearning about the remote control Setting up your TV/DVDPress Starting setupChanging the on-screen display language To select a languageAdding and erasing channels manually Game modeAdding channels to the TV/DVD’s memory Programming channels automaticallySwitching between two channels Adjusting the channel settingsProgramming your favorite channels To change your password Using the Locks menuSelecting a password To select your password and access the Locks menuUsing the V-Chip parental control feature Locking the video inputs Locking channelsUsing the panel lock feature Setting the GameTimerTMTo create channel labels Labeling channelsTo erase channel labels To label the video input sources Setting the clockSelecting the video input source Labeling the video input sourcesTo cancel the on timer Setting the on timerSet the desired minutes and channel As in step Selecting the picture size TheaterWide 1 picture size for 43 format programsNatural picture size Full picture size for 169 source programs TheaterWide 2 picture size for letter box programsScrolling the TheaterWide picture TheaterWide 2 and 3 only To set the Cinema Mode to Video Selecting the cinema modeUsing the Aspect feature To set the Cinema Mode to FilmUsing the closed caption feature Setting the sleep timerMode Picture Quality Adjusting the pictureSelecting the picture mode Adjusting the picture qualitySelecting the color temperature Using the CableClear featureResetting your picture adjustments Selecting stereo/SAP broadcasts Adjusting the soundAdjusting the sound quality Muting the soundUsing the StableSound feature Resetting your audio adjustmentsUsing the surround sound feature Displaying on-screen information Adjusting the back lighting featureAuto power off Understanding the Power Return featureAudio menu settings Picture/Audio adjustments in PC modeResetting your picture/audio adjustments in PC mode Picture menu settingsPlaying a disc Resume featureBasic playback DVD VCD CD About Locating a chapter or track Playing in fast reverse or fast forward directionsPlaying frame by frame DVD VCD Playing in slow-motionLocating desired scene DVD VCD CD CancelReturning to the scenes To cancel the MarkerMarking desired scenes DVD VCD Marking the scenesSome discs may not work with the repeat operation Repeat playback DVD VCDTo clear the program one by one Program playback VCDRandom playback VCD To change the programTitle selection Changing anglesDVD menu Subtitles Changing soundtrack language DVD VCDCase of Video CD playback To turn off the PBC VCD Disc status DVD VCDTo turn on the PBC Limitations on display MP3/WMA/JPEG/DivX and Audio CD operationMP3/WMA/JPEG/DivX CD information CD Limitations on MP3/WMA/JPEG/DivX CD playbackAbout file menu MP3/WMA CD and Audio CD playback CDSelect Files Slide show playback CD Jpeg CD playback CDZooming an image Divx CD playback Playing DivX VOD contentProgram playback CD Random playback CDTo remove file from program list Customizing the function settings DVD function setupSetting procedure DVD VCD CD Language Setting detailsPicture Sound Parental control settingSet the new password If you forget the passwordTo exit from the entry, press Return Temporary cancel the rating level by DVD discAppendix Language code listSymptom Solution TroubleshootingSymptom of DVD Solution Television SpecificationsDVD/CD Player Limited United States Warranty Limited Canada Warranty Memo Memo Memo National Service Division
Top Page Image Contents