Resetting your audio adjustments
The RESET function returns the audio adjustments to the following factory settings:
Bass | center (25) |
Treble | center (25) |
Balance | center (0) |
To reset your audio adjustments:
1. Press MENU, then press 
or 
to display the AUDIO menu.
2. Press▲ or ▼ to highlight RESET, and then press 
or 
.
Using the StableSound® feature
The StableSound feature limits the highest volume level to prevent extreme changes in volume when the signal source is changed.
To turn on the StableSound® feature:
1.Press MENU, then press 
or 
to display the AUDIO menu.
2.Press ▲ or ▼ to highlight STABLE SOUND.
3.Press 
or 
to highlight ON.
To turn off the StableSound® feature:
Highlight OFF in step 3 above.
Using the surround sound feature
The surround sound feature expands the audio listening field wider and deeper to create exceptional sound quality from the TV’s speakers. The feature uses stereo signals from a TV broadcast or video input.
To turn on the surround sound feature:
1.Select the STEREO mode, if available (see “Selecting stereo/SAP broadcasts” on page 40.)
2.Press MENU, then press 
or 
to display the AUDIO menu.
3.Press ▲ or ▼ to highlight SURROUND.
4.Press 
or 
to highlight ON.
To turn off the surround sound feature:
Highlight OFF in step 4 above.
In general, you can leave your TV in surround mode because it will automatically output the type of sound being broadcast (surround stereo or monaural).
41
Introduction
your TV/DVDConnecting
MENU
your TV/DVDSetting up
TV/DVD’s FeaturesUsing the
DVD Playback
Appendix
41 | 13/3/06, 5:22 PM |