Basic playback
Playing a disc
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc slot as it is closing. Neglecting to do so may cause serious personal injury.
DVD
VCDCD Basic playback
Preparations:
• When connecting to other equipment, turn the power off.
1 Press POWER on the unit or on the remote control to turn on the unit.
The Power indicator will light.
•Every time you press POWER, the TV/DVD starts from TV mode.
•When using an amplifier, switch on the amplifier.
Press TV/DVD on the remote control to select DVD
2 mode.The DVD startup screen will appear on the screen. “Reading” display will change to “No Disc”. (If DVD disc has already loaded,
playback will start automatically.)
3 Load the disc in the disc slot.
Load the disc in the disc slot with the label side facing forward. (If the disc has a label.) Hold the disc without touching either of its surfaces, align it with the guides, and place it in position.
Note:
When you playback the 8cm disc, you need an adapter (not supplied).
POWER VOLUME | PLAY STOP | EJECT |
+/– |
|
|
4 On the
No Disc | Reading |
|
|
|
|
|
|
| Basic |
|
|
|
|
|
| ||
|
|
|
|
|
|
| playback |
| • A menu screen will appear on the TV screen, if | ||||||
|
|
| |||||
| the disc has a menu feature. |
|
| ||||
| Press / or / to select title, then press |
|
| ||||
| ENTER. Title is selected and play commences. |
|
| ||||
|
|
|
|
|
|
|
|
5 Press VOLUME + or – to adjust the volume.
VOLUME | 32 |
6 Press STOP to end playback.
Resuming facility
• The unit records the stopped point, depending on the disc. “ ” appears on the screen. Press PLAY to resume playback (from the scene point).
• If you press STOP again or un- load the disc (“” appears on the screen.), the unit will clear the stopped point.
To start playback in the stop mode
Press PLAY.
Note:
If the unit does not operate properly:
Static electricity, etc., may affect the player's operation. Disconnect the AC power cord once, then connect it again.
31
J5N00201A [E] | 31 | 6/8/04, 4:08 PM |