Teletext setting up, Press Exit to finish

TELETEXT

Teletext – setting up

This TV has a multi-page teletext memory, which takes a few moments to load and it offers two ways of viewing text – AUTO and LIST which are explained on the next page.

Selecting the character set and viewing mode and general information

About teletext

Selecting characters and modes

Before using teletext you can choose the correct alphabet (Character) and whether to view in LIST or AUTO mode, (explained on the next page).

1	From the SET UP menu, use the P or Q button
	to highlight Teletext and then the R button to
	select.
2	With Character highlighted, use the R button to
	select your required character set.

TELETEXT

▼ Back

Character	▼	CHARACTER-1	▼
Mode
Mode	▼	AUTO	▼

CHARACTER-1for Western European countries and Turkey

CHARACTER-2for Eastern European countries

3	To select the Mode, with the Q button highlight
	Mode.
4	With the S or R button choose AUTO or LIST.
5	Press EXIT to finish.

The 6/7button:

Pressing the 6/7button once will bring up the teletext screen. Press again to superimpose the teletext over a normal broadcast picture. Press again to return to normal TV mode. You need to return to normal viewing if you wish to change channels.

When you first press the 6/7button to access the text service, the first page you see will be the initial page.

In AUTO mode this displays the main subjects available and their relevant page numbers.

In LIST mode you will see whichever page number is currently stored on the RED button.

To access any teletext page, enter the 3 digit page number, using the numbered buttons on the remote control,

e.g. 430, or to advance to the next page, press the

P f( P) button, to go back to the previous page press the

Pe( Q) button.

Sub-pages

Once in this chosen page, if there are sub-pagesthey will automatically load into memory without changing the one you are reading. Arrows will appear alongside the page number, indicating sub-pageswhich have loaded to the left or right of the one on the screen. If there are many sub-pagesit will take a long time for them all to load and this will depend on the speed with which the broadcaster transmits them.

To access the sub-pagesin	☛	To alter the volume

	you will need to cancel
memory press the X(B)
	sub-
button, then use the		pages mode by
	pressing the

SandR buttons to view		X(
		B)
them.	button first.

Whilst in sub-pagesmode an indicator will show in the bottom left of the screen. After a short time of inactivity the indicator will disappear. To access the sub-pagesagain press the X(B) button.

These sub-pageswill remain available to view until you choose another page or, in normal TV mode, you change channel.

20			Teletext continued over the page…
20