Toshiba 32ZP18Q, 36ZP18Q owner manual Connecting the speakers

Page 5

SETTING UP

Connecting the speakers

!

WARNING: do

 

attempt to

external

share

 

speakers

with your

 

 

Hi

serious

-Fi as

 

damage

may occur.

 

not

In order to enjoy the full benefits of Surround Sound it is necessary to connect two rear surround speakers and two front extension speakers.

When connecting external Hi-Fi speakers, they must be 8 ohm, 10W minimum. The front speakers should be positioned either side of the TV and will deliver the left and right sound. The internal speakers will then deliver the centre channel required to enjoy Dolby Digital.

When connecting external speakers always make sure that the power is OFF.

Extension Front Speaker connections

To connect extension front speakers simply press the

connector and insert the cable. You must now set the switch

to EXT as shown.

Always make sure that the lead with the stripe (or raised edge) is connected to the RED terminal and the other (smooth) lead is connected to the BLACK terminal.

Main

TV

Main

Speaker

Speaker

Don’t forget to set the switch to EXT.

These are suggested

positions only.

Place your speakers to

suit and adjust the

balance as necessary.

Surround

Speaker

Surround

Speaker

Surround Speaker connections

To connect surround speakers simply press the connector and insert the cable. These speakers should be sited in line with the normal viewing position

KSURROUND

8

5

Image 5
Contents Toshiba Contents Air Circulation… For your safetyDolby Surround To select mode Your new television’s remote controlBatteries... and the effective range of the remote… Teletext control buttons Super Woofer To mute the soundConnecting the speakers TV back connections… Connecting and turning on your new TV…and switching your new TV on… Allow the television to complete the search Choosing the language and system Auto tuningSET UP Or Q to change if required, see Manually tuning your TVManual tuning Programme Sorting Manually tuning your TV Sorting programme positionsTo sort programme positions Manual fine tuning Manual fine tuning and programme skipExperience interference or a weak signal Programme skipGeneral and sound controls Indicator, described onOr j+ R button to adjust the volume Broadcast Widescreen viewing149 Picture controls Feature MenuPicture size/position Automatic format WidescreenDNR Digital Noise Reduction Scan ModeStill Picture PictureStereo and Bilingual transmissions TimerTimer AV Connection AV connections and input selectionDolby Digital AdjustmentsDolby Digital See nextDolby Pro Logic Surround Test ModeRear Option Must For the TestDigital Surround Processor Teletext Teletext setting upTo highlight Teletext and then the R button to Select your required character setMoving around Auto TeletextList Rest of the text control buttons areTeletext Control buttons Using the buttons on the remote controlFront connections… Front connections and controlsFront controls PleaseOu can Back connectionsSound Using the MenusOn-screen menus To check that you have the best colour… There is little or no colour……Check the speaker switch has been set to EXT After 20 minutes the TV will switch to Standby modeAre inserted correctly Cause damageSubject