Programming Volume Control | Toshiba NG-IR, NG-ATH18, NG-ATH33

5 SETTING UP YOUR REMOTE TO OPERATE A DEVICE USING THE TV, SAT. OR VCR MODE KEYS

To set up the remote to operate your TV, VCR, Satellite receiver, and DVD player, look for the manufacturers’ three-digit codes for the device type in the codes sections (sections 8-12), then perform the following steps.

TELEVISION codes will be set up using the TV mode key. SATELLITE codes will be set up using the SAT mode key.

VCR, TV/VCR COMBO, and DVD codes will be set up using the VCR mode key.

NOTE: SETTING UP THE REMOTE TO OPERATE A DEVICE USING THE DVD MODE KEY IS EXPLAINED SEPARATELY IN THE NEXT SECTION.

bOn the remote control, press and hold the mode key (TV, SAT, or VCR) until the LED begins flashing.

cSelect a code from the appropriate code list for the brand of device you wish the remote to operate, then enter the code using the numeric keys on the remote.

After you press the first digit, the LED should light and stay on. After you press the last digit, the LED should flash rapidly and turn off. If the LED does not flash rapidly before turning off, repeat the procedure, starting at step 1 above, using a valid code from the appropriate code list.

dPoint the remote at the device and press POWER. If the device turns on/off, then the remote has been set up with a code that can control the device. However, test other primary func- tions to see if you have entered the "best" code for operating the device. If necessary, try another code listed for your brand of device, starting at step 1 above.

eFor reference, write the codes below

TV code ____ ____ ___Satellite Code ____ ____ ____

VCR code ____ ____ ____ circle one (VCR, TV/VCR COMBO, DVD)

If none of the codes listed for your device works, the CodeScan™ procedure will allow you to cycle through all the available codes in the remote until you find the right one:

bManually turn on power to the device for which you want to set up the remote to operate (TV, SAT, VCR, TV/VCR COMBO, DVD).

cOn the remote control, press and hold the appropriate mode key (TV, SAT, VCR) until the LED begins flashing.

dPress and release POWER. The LED will stop flashing and remain on.

ePoint the remote control at the device, Press and release the UP ARROW key repeatedly and slowly. Each time you press the key, the remote sends the power-off command using a different device code. When the device turns off, that means that the remote has a code that can control the device. If you accidentally press the UP ARROW key after the device has turned off, press the DOWN ARROW key to return to the previous device code.

fTest whether other primary key functions operate (including POWER to turn the device ON again). If a primary key function does not work, continue to press the UP ARROW key to find another code that turns the device OFF. Then test the primary key functions again.

gWhen you are satisfied that all primary functions are working, press SELECT to lock in the code. The LED should flash rapidly and turn off.

6 SETTING UP YOUR REMOTE TO OPERATE A DEVICE USING THE DVD MODE KEY

Any type of device may be set up to operate in DVD mode. Refer to the code list sections to find the codes listed for the brands of your devices.

bOn the remote control, press and hold the DVD mode key until the LED begins flashing.

cPress and release the appropriate mode key ( TV, SAT, or VCR), corresponding to the type of device you want to operate in DVD mode. The LED will stop flashing and remain on.

dSelect a code from the appropriate code list for the brand of device you wish the remote to operate, then enter the code using the numeric keys on the remote. This code should be one selected from the following sections:

•TELEVISION if you pressed the TV mode key in step 2 above

•SATELLITE if you pressed the SAT mode key in step 2 above

•VCR, TV/VCR COMBO, or DVD if you pressed the VCR mode key in Step 2 above.

After you press the last digit, the LED should flash rapidly and turn off. If the LED does not flash rapidly before turning off, repeat the procedure, starting at step 1 above, using a valid code from the appropriate code list.

ePoint the remote at the device and press POWER. If the device turns on/off, then the remote has been set up with a code that can control the device. However, test other primary functions to see if you have entered the best code for operating the device. If necessary, try another code listed for your brand of device, starting at step 1 above. For reference, write the codes below

DVD code ____ ____ ____ circle one (TV, SAT, VCR, TV/VCR COMBO, DVD)

If none of the codes listed for your device works, the CodeScan™ procedure will allow you to cycle through all the available codes in the remote until you find the right one:

bManually turn on power to the device for which you want to set up the remote to operate (TV, SAT, VCR, TV/VCR COMBO, DVD).

cOn the remote control, press and hold the DVD mode key until the LED begins flashing.

dPress and release the appropriate mode key (TV, SAT, or VCR), corresponding to the type of device you want to operate in DVD mode. The LED will stop flashing and remain on.

ePress and release POWER. The LED will remain on.

fPoint the remote control at the device, Press and release the UP ARROW key repeatedly and slowly. Each time you press the key, the remote sends the power-off command using a different device code. When the device turns off, that means that the remote has a code that can control the device. If you accidentally press the UP ARROW key after the device has turned off, press the DOWN ARROW key to return to the previous device code.

gTest whether other primary key functions operate (including POWER to turn the device ON again). If a primary key function does not work, continue to press the UP ARROW key to find another code that turns the device OFF. Then test the primary key functions again.

hWhen you are satisfied that all primary functions are working, press SELECT to lock in the code. The LED should flash rapidly and turn off.

7 PROGRAMMING VOLUME CONTROL

You can set up the remote control so that it controls volume through either the satellite receiver or the television (this procedure does not affect the device codes you set previously).

bPress and hold the SAT until the LED begins flashing.

cPress the mode key of the device that you want to control volume (TV or SAT). The LED should flash rapidly and turn off. Volume is now controlled through the specified device.

NG-ATH33, NG-ATH18, NG-IR specifications

Toshiba has long been recognized as a leader in innovative technologies, and the recent introduction of the NG-IR, NG-ATH18, and NG-ATH33 models solidifies this reputation. These advanced air conditioning units offer a perfect blend of efficiency, comfort, and modern technology, catering to a wide range of user needs.

The NG-IR model brings forefront of intelligent cooling technology to residential and commercial spaces. Its key feature is the Inverter Technology, which adjusts the compressor speed according to the cooling demand, ensuring optimal energy consumption and temperature control. This results in lower energy bills and a more stable indoor climate. The unit is also equipped with a high-efficiency filter that helps purify the air, capturing harmful particles and ensuring a healthier living environment.

On the other hand, the NG-ATH18 and NG-ATH33 units are designed with versatility in mind. These models are equipped with multi-mode functionality, allowing users to switch between cooling, heating, dehumidifying, and ventilation modes effortlessly. This adaptability makes them suitable for various climate conditions, providing year-round comfort regardless of the weather outside.

Another standout feature shared by these models is the eco-friendly refrigerant used, which minimizes environmental impact while maximizing cooling efficiency. The user-friendly interfaces, along with smart Wi-Fi capabilities, allow for remote control and monitoring through mobile applications, enhancing convenience for users managing their indoor climate.

Toshiba’s commitment to noise reduction technology means that both the NG-ATH18 and NG-ATH33 operate quietly, making them ideal for use in bedrooms and workspaces where low noise levels are crucial. Their sleek and modern design also allows them to blend seamlessly into any interior decor, ensuring that functionality does not compromise aesthetics.

Additionally, these units are built with durability in mind, featuring robust materials and components designed to withstand varying conditions. Their compact size makes them easier to install and maintain, allowing for a hassle-free experience.

In conclusion, Toshiba’s NG-IR, NG-ATH18, and NG-ATH33 air conditioning units embody state-of-the-art technology, offering energy efficiency, versatility, and increased comfort. With features tailored for modern living and an unwavering commitment to environmental sustainability, these models are setting new benchmarks in the air conditioning market. Whether for residential or commercial use, Toshiba’s latest offerings ensure a perfect indoor climate all year round.