Classe Audio CDP-300 owner manual Specifications

Specifications

All specifications are accurate at the time of printing. Classé reserves the right to make improvements without notice.

■Frequency response

	(single-ended)	8 Hz – 20 kHz +0/-0.7dB
	(balanced)	8 Hz – 20 kHz ±0.1dB
■	Distortion (THD+noise)	0.0012%
■	Output voltage (single-ended)	2Vrms
■	Output voltage (balanced)	4Vrms
■	Signal-to-noise ratio	110dB typical
■	Channel separation	better than 112dB
■	D/A Converter	3 x Cirrus Logic CS4398
■	Audio sample rate	192kHz

■Formats supported CD, CD-R, CD-RW, DVD Audio, DVD Video, VCD, SVCD, MP3, AAC, WMA, DTS CD,

	Audio outputs	DVD-R, DVD+R, DVD-RW, DVD+RW
■		6 x RCA, 2 x XLR, Coax S/PDIF 1 x RCA,
	Video outputs	AES/EBU 1 x XLR, Optical 1 x Toslink
■		HDMI, Component (progressive scan),
	Internal Scaling	S-Video, Composite
■		480i (via all video outputs),
		480p (via component and HDMI)
	Power consumption	720p/1080i/1080p (via HDMI)
■		72W
■	Mains voltage	determined by the needs of country for which
	the unit was manufactured; cannot be reset by dealer or user
■	Overall dimensions	Width: 17.5” (445mm)
		Depth: 16.5” (419mm)
	Net weight	Height: 4.75” (121mm)
■		27 lbs (12.3 kg)
■	Shipping weight	35 lbs (15.9 kg)

For more information, see your Classé dealer, or contact:

Classé Audio

5070 François Cusson

Lachine, Quebec

Canada H8T 1B3

Telephone	+1 (514) 636-6384
FAX	+1 (514) 636-1428
Internet:	http://www.classeaudio.com
email:	cservice@classeaudio.com

Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved. i-Command™ is a trademark of Equity International, Inc. All rights reserved.

AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved. Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.

41