Basic operations
4Select a desired Audio Output
Select an Audio Output according to your audio connection. Enter AUDIO SETUP from the SETUP MENU.
For COAXIAL or OPTICAL connection to digital amplifier or receiver, set the SPDIF OUTPUT to SPDIF/RAW or SPDIF/PCM. For Analog 5.1 Channel or Stereo (Karaoke) connection, set SPDIF OUTPUT to OFF.
SPDIF OUTPUT | OFF |
OP MODE | SPDIF/RAW |
DUAL MONO | SPDIF/PCM |
COMPRESSION |
|
PRO LOGIC |
|
LPCM OUTPUT |
|
MAIN PAGE |
|
5Select a desired Speaker Setup
Select according to your speaker connection.
For digital connection through COAXIAL or OPTICAL audio output, there is no need to adjust the SPEAKER SETUP in the SETUP menu. The adjustment needs to be made in the digital amplifier.
For Stereo (Karaoke) audio output, press MIC ON button on the remote control to set KARAOKE ON.
For Analog 5.1 Channel audio output, press MIC ON button on the remote control to set KARAOKE OFF. Each of the channel can further be adjusted in SPEAKER SETUP under SETUP menu. See “Selecting speaker setup” at page 19.
NOTE
Do not select a digital (SPDIF) output when the player is connected to TV or an audio system using Analog 5.1 Channel or Stereo (Karaoke) output of the player. 
Microphone signal is only output through Stereo (Karaoke) audio output.
6Press SETUP to return
The TV screen returns to the opening display.
Basic playback
D V D | Super | INX | Video | CD | Audio |
VIDEO | C D + G | INX2 | C D | Graphics | C D |
1Press OPEN/CLOSE to open the disc tray.
2 Place a disc in the disc tray.
3Press OPEN/CLOSE to close the disc tray.
4 Press PLAY.
The player starts playback from the beginning.
If a menu is shown on the TV screen
When inserting a DVD VIDEO or Video CD disc, a menu may be shown on the TV screen. From the menu, you can select a desired item to be played back.
For DVD VIDEO
1Press
/
/
/
to select a desired item.
2 Press ENTER.
The player starts playback of the selected item.
For Super CD+G
1Input a song number or press 
/
to select a desired song.
2 Wait for the display of title and press ENTER. The player starts playback of the selected song.
For INX, INX2
1Input a song number or press 
/
to select a desired song.
2 Wait for the display of title and press ENTER. The player starts playback of the selected song.
For Video CD
Press the numeric buttons to select a desired item. The player starts playback of the selected item.
NOTES
Do not insert an unplayable disc.
When inserting a disc on the disc tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the disc tray is closed, or you may not be able to remove the disc from the player.
If it takes time to read the loaded disc ("READING" appears on the display window), remove the disc by pressing OPEN/CLOSE on the remote control and check the disc.
8