Karaoke operations

Karaoke Operations						Super CD+G (SCDG) Operations
D V D	Super	INX	Video	CD	Audio	Super
VIDEO	C D + G	INX2	C D	Graphics	C D	C D + G

1Press MIC ON to set KARAOKE MODE ON.

This enables the key control and voice cancel (MPX) features in the player. The SPEAKER SETUP is also automatically changed to DOWNMIX: STEREO.

Be sure to set SPDIF OUTPUT as OFF in AUDIO SETUP.

Microphone signal is only output through 2 Channel Downmix (ML/MR) audio output terminals.

2Insert a karaoke disc and select a song for playback.

Each disc may require different steps to search through menus and playback a song.

3Adjust the volume and echo level of the microphones using VOL1, VOL2, and ECHO control knobs.

Be sure to turn on the microphones.

4Press VOL + and VOL - buttons on the remote control to adjust the volume level of playback music in relation to the microphones.

5Adjust the key (pitch) of the song by pressing and buttons according to your preference.

6Press MPX button to set OFF / ON the lead vocal in the song, to practice along or to sing in solo.

In most DVD Karaoke discs, the voice cancel feature is controlled by LANGUAGE button.

Only certain karaoke discs (multiplex format) have embedded lead vocals that can be set ON or OFF.

1Insert the SCDG disc into the player.

After reading the disc, the initial SCDG screen will appear on the TV screen..

2Using numeric buttons, input a song number or using / buttons, search for a song.

Wait for the title of the song to appear on the screen. Press ENTER or PLAY to begin playback

When selecting a song after a rest or other operations such as changing SETUP menu, it may take longer for the song title to appear. Be sure to wait for the title before pressing ENTER or PLAY to begin playback.

3To program next songs, enter the song numbers followed by pressing of PROG after each entry.

The programmed song will appear on the lower left corner of the screen. You can program up to 10 songs.

The programmed songs will play one song at a time, waiting for a press of PLAY button at the end of each song.

To see the list of programmed songs, press PROG. The list will be displayed at the bottom of the TV screen.

NOTE

The programming is possible only when the player is currently playing a song.

4To cancel a programmed song, press STOP.

If stopped during playback, the song in play will be canceled. If stopped while waiting for the next programmed song, the song in waiting will be canceled.

5To see playback status, press DISPLAY.

Elapsed time and remaining time of the song will appear sequentially. Press DISPLAY again to dismiss the playback status.

6Press PAUSE to pause the playback. Press PLAY to resume playback.