Toshiba 27HL85 owner manual Important Safety Instructions, Installation

Page 3
Wide plug

Important Safety Instructions

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturerÕs instructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9)Do not defeat the safety purpose of the polarized or

grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or

the third prong are provided for your safety. If the provided plug does not fit into

your outlet, consult an electrician for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)Only use attachments/accessories specified by the manufacturer.

12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain

or moisture, does not operate normally, or has been dropped.

CAUTION: If the TV is dropped and the cabinet or enclosure surface has been damaged or the TV does not operate normally, take the following precautions:

¥ALWAYS turn off the TV and unplug the power cord to avoid possible electric shock or fire.

¥NEVER allow your body to come in contact with any broken glass or liquid from the damaged television. The LCD panel inside the TV contains glass and a toxic liquid. If the liquid comes in contact with your mouth or eyes, or your skin is cut by broken glass, rinse the affected area thoroughly with water and consult your doctor.

¥ALWAYS contact a service technician to inspect the TV any time it has been damaged or dropped.

15)The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Installation, Care, and Service

Installation

Follow these recommendations and precautions and heed all warnings when installing your TV:

16)Never modify this equipment. Changes or modifications may void: a) the warranty, and b) the userÕs authority to operate this equipment under the rules of the Federal Communications Commission.

17)DANGER: RISK OF SERIOUS PERSONAL INJURY, DEATH, OR EQUIPMENT

DAMAGE! Never place the TV on an unstable cart, stand, or table. The TV may fall, causing serious personal injury, death, or serious damage to the TV.

18)Never place items such as vases, aquariums, or candles on top of the TV.

19) Always place the TV

 

Sturdy tie

on the floor or a sturdy,

 

(as short as possible) Clip

 

 

level, stable surface

 

Hooks

that can support the

 

Clip

 

weight of the unit. To

Screw

secure the TV, use a

 

 

sturdy tie from

TV side

 

the hooks on the rear

TV top

of the TV pedestal to a wall, pillar, or other immovable structure. Make sure the tie is tight, secure, and parallel to the floor. Leave a space of at least 4 inches around the TV.

20)Never expose the apparatus to dripping or splashing liquid or place items such as vases, aquariums, any other item filled with liquid, or candles on top of the TV.

21) Never block or cover the slots or openings in the TV cabinet back, bottom, and sides.

Never place the TV:

¥ on a bed, sofa, rug, or similar surface;

¥too close to drapes, curtains, or walls; or

¥in a confined space such as a bookcase, built-in cabinet, or any other place with poor ventilation.

The slots and openings are provided to protect the TV from overheating and to help maintain reliable operation of the TV.

22)Never allow anything to rest on or roll over the power cord, and never place the TV where the power cord is subject to wear or abuse.

23)Never overload wall outlets and extension cords.

24) Always operate the TV with

120V AC

a 120V AC, 60Hz power source

 

only.

 

CAUTION: To reduce the risk of electric shock, do not use the polarized plug with an extension cord, receptacle, or other outlet unless the blades can be inserted completely to prevent blade exposure.

3

Image 3
Contents 27HL85 Dear Customer Safety PrecautionsInstallation Important Safety InstructionsCare cont. from previous column ServiceImportant notes about your LCD TV Introduction Welcome to Toshiba Supplied accessoriesCheck that you have the accessories and items shown IntroductionVIDEO-2 Exploring your new TVConnecting your TV Connecting an antenna or cable TVChannels Connecting a cable converter box and VCR Connecting a VCRConnecting a DVD player or satellite receiver and a VCR For Hdmi or DVI connection, see TV upper back panel TV lower back panel From DTV Antenna Connecting a camcorder Connecting two VCRs¥ one pair of standard analog audio cables Connecting an HDMIª or a DVI device to the Hdmi input¥ one Hdmi cable type a connector ¥ one HDMIÐtoÐDVI adapter cable Hdmi type a connectorRemote control effective range Using the remote controlPreparing the remote control for use Installing the remote control batteriesFor future reference, write down the codes you used Remote control codesRemote control codes Setting Your UsingtheTVÕs Features Appendix Index CLEAR/EXIT Remote Control function key chartLearning about the remote control Learning about the menu system Setting up your TVPress x or to display your desired language Changing the on-screen display languageAdding channels to the TVÕs memory Programming channels automaticallyPress z to select CH Program Adding and erasing channels manually Changing channelsProgramming your favorite channels Using the TVÕs featuresAdjusting the channel settings Switching between two channels using Channel ReturnConnecting Labeling channels Selecting the picture size Viewing the wide-screen picture formats¥ None of the picture is hidden TheaterWide 1 picture size For 43 format programsPress x or to adjust the settings as required Adjusting the Picture PositionPress MENU, and then press x or until the SET UP Press y or z to highlight the item you want to adjustPress x or to select on Setting the Hdmi audio modeUsing the Auto Aspect feature Press y or z to highlight Auto AspectTo turn off the gray screen function Select OFF in above Using the gray screen functionSelecting the gray level of the side panels To turn on the gray screen functionIf you cannot remember your PIN code Using the Locks menuUsing the V-CHIP menu Entering the PIN codeRepeat steps 2 and 3 to set the next item OFF To release your setting UnlockTV Rating Independent rating system for broadcasters TV Rating menu appears Press z or y to select an itemChip menu Mpaa Rating Independent rating system for moviesLocking channels Unlocking programs temporarilyRepeat steps 2 and 3 for other channels Repeat for other channels Changing the PIN code Locking the video inputsPress x or to select the mode you prefer Adjusting the pictureSelecting the picture mode Adjusting the back light featureUsing the Black stretch feature Adjusting the picture qualityPress x or to select LOW, MIDDLE, HIGH, or Auto Using the Mpeg NR featureUsing the CableClear¨ DNR feature Press x or to select LOW, MIDDLE, HIGH, or OFFSelecting the cinema mode Selecting the color temperatureLabeling the video input sources Selecting the video input sourceUsing the closed caption feature Press x or to highlight C1-C4 or T1-T4¥ To view text, highlight T1, T2, T3, or T4 Setting the on timer Setting the sleep timerAdjusting the sound Muting the soundSelecting stereo/SAP broadcasts Using the WOWª surround sound feature Adjusting the sound quality Using the StableSound¨ featureTo turn off the StableSound feature Select OFF in above Understanding the auto power off feature Understanding the last mode memory featureDisplaying on-screen information Appendix SpecificationsT2, T3, or T4. Turn closed captioning OFF TroubleshootingAntenna Black box appears on the screenLimited United States Warranty Limited Canada Warranty Channel programming IndexToshiba ELECTROMEX, S.A. DE C.V