Toshiba 42A3000T Activating the black stretch, Activating the DNR Digital Noise Reduction

Using the TV’s features

Activating the black stretch

This function increases the strength of dark areas of the picture which improves definition.

1 Press M, then press I or i to display the PICTURE menu.

PICTURE
Picture settings	OK
3D Color management	Off
Base color adjustment
Cinema mode	On
MENU Back EXIT Watch TV

2 Press u or U to select the Picture settings menu, then press Q.

3 Press u or U to select Black stretch on the 2nd page.

Picture settings	2/2
Black stretch	On
MPEG NR	Low
DNR	Auto
Color Temperature	Cool
MENU Back EXIT Watch TV

4 Press I or i to select On or Off.

Black stretch On

Note:

In the PC input mode (- page 19), this mode is not available.

Activating the MPEG NR (Noise Reduction)

If the receiving signal of MPEG is a mosquito (grained) noise depending on the compression and conversion, the noise may be reduced when using this function.

1 From the Picture settings menu, press u or U to select MPEG NR on the 2nd page.

2 Press I or i to select Off, Low, Middle or High.

MPEG NR Low

Note:

In the PC input mode (- page 19), this mode is not available.

Activating the DNR (Digital Noise Reduction)

If the receiving signal is weak and the picture is blurry, the picture may be improved when using this function.

1 From the Picture settings menu, press u or U to select DNR on the 2nd page.

2 Press I or i to select Auto, Off, Low, Middle or High.

DNR Auto

Note:

This function is available for 480i and 576i signals.

Selecting the color temperature

You can change the tone of the picture by selecting from three preset color temperatures: Cool, Normal or Warm.

1 From the Picture settings menu, press u or U to select Color Temperature on the 2nd page.

2 Press I or i to select mode you prefer.

Color Temperature Cool

Cool: Lends a blue hue to the picture.

Normal: Neutral

Warm: Lends a red hue to the picture.

Adjusting the color management

You can adjust the picture color quality by selecting from 6 base color adjustments : Red, Green, Blue, Yellow,

Magenta or Cyan.

1	From the PICTURE menu, press u or U to select 3D
2	Color management.
	Press I or i, then press I or i to select On.
3		3D Color management							On
	Press Q, then press u or U to select Base color
4	adjustment.
	Press Q, then press u or U to select an item you want to
5	adjust.
	Press i, then press I or i to select Hue, Saturation or
	Brightness.
			Base color adjustment
					Hue		Saturation		Brightness
			Red		0		0		0
			Green		0		0		0
			Blue		0		0		0
			Yellow		0		0		0
			Magenta		0		0		0
			Cyan		0		0		0
		Reset							OK
6		MENU Back			EXIT Watch TV
	Press u or U to adjust the settings as required.
				Hue		Saturation			Brightness
			Red
				0				0		0

Notes:

•If you select color management Off mode, this mode is not available.

•In the PC input mode (- page 19), this mode is not available.

Resetting the base color adjustment

The Reset function adjusts the base color adjustment to the factory settings.

1 From the Base color adjustment menu, press u or U to select Reset.

2 Press Q.

Using the cinema mode

A movie film’s picture runs at 24 frames a second, whereas movie software such as DVD, etc., that you enjoy watching on television at home runs at 30 (NTSC) or 25 (PAL) frames a second. To convert this signal to reproduce a smooth motion and picture quality, select the On mode.

Effective signal and setup conditions:

•When the Video input mode is selected.

•When the input signal format is 480i and 576i signals.

16