Getting started
Watching TV programs
Selecting the menu language
Choose from 9 different languages (English, Chinese (CS), Malay, Thai, Vietnamese, Russian, Arabic, Persian or French) for the
1 Press M, then press Y or y to display SET UP menu. 2 Press < or > to select Language.
3 Press Y or y to select the desired language.
SET UP |
|
| |
Language |
| English |
|
Auto tuning | OK | ||
Manual tuning | OK | ||
AV connection | OK | ||
Picture position | OK | ||
|
|
|
|
MENU Back EXIT Watch TV |
|
| |
Changing the program position
1 Enter the desired program position number using the Number buttons on the remote control.
For program positions below 10, use 0 and the required number e.g., for program position 1.
2 You can also change the program position by using > or <.
The program position will be displayed on the screen with the Mono/Stereo/Dual audio status.
Note:
The program position selection change between different format channels takes several seconds.
Switching between two program positions
You can switch two program positions without entering actual position number each time.
1 Select the first program position you want to view.
2 Select the second program position with the Number buttons
3 Press :. The previous channel will be displayed.
Each time you press :, the TV will switch back and forth between the two program positions.
Displaying the on-screen information
1 Press K to display the following
4 | ABCD | Stereo |
The information will disappear in 6 seconds.
•Program position or external input mode selected
•Program skip on/off information
•Label (if set)
•Mono/Stereo/Dual audio status
2 To erase the display instantly, press K again.
Programming channels into the TV’s channel memory
•First, use the Auto tuning function to preset all the active channels in your area automatically. Then, arrange the preset channels with the Manual tuning function so that you can tune into only desired channels.
•Use the Manual tuning operation if desired channels cannot be preset with the Auto tuning or if you would like to preset channels to specific position numbers one by one.
Programming channels automatically
1 From the SET UP menu, press < or > to select Auto tuning.
2 Press Q to display the Auto tuning menu.
Auto tuning
!Press OK key to start. EXIT for no change.
MENU Back EXIT Watch TV
3 Press Q to start the automatic search.
The search will begin for all available stations.
Auto tuning
Searching
Pos :2
EXIT Stop
The slide bar will move along the line as the search progresses.
If you make a mistake, simply repeat steps
4 When the automatic search is completed, the TV will automatically return to the first program position.
5 Press > or < to view the programmed position.
Note:
When you preset the program channel which sound of broadcast transmission system adopts “M” system, the sound system may not be tuned correctly if the radio waves transmit badly. At that time, preset the channel by Manual tuning. The countries such as Myanmar, Brazil, Chile, Colombia apply to this case. See page 29 for more details.
12