Toshiba 32W300P Brightness, Contrast, Colour and Sharpness/DNR, Select BRIGHTNESS. Then press

Page 21

Brightness, Contrast, Colour and Sharpness/DNR

Brightness, Contrast, Colour and Sharpness

1 Select BRIGHTNESS. Then press	or	to adjust the
brightness.

Notes:

•To reset BRIGHTNESS, CONTRAST, COLOUR, TINT and SHARPNESS to the factory preset

values, select RESET in step 1 then

press or .

•In HDMI or COMPONENT mode, the “DNR” option cannot be selected.

B R I G H T N E S S	2 5
C O N T R A S T	2 5
C O L O U R	2 5
T I N T	0
S H A R P N E S S	2 5
D N R	O F F

: SELECT	: ADJUST
EXIT : END	MENU : RETURN

If you wish to set the contrast, colour, tint, or

sharpness, press or to select CONTRAST, COLOUR, TINT, or SHARPNESS. These can all be adjusted in the same way.

The “TINT” option can be selected if an NTSC 3.58MHz or NTSC 4.43MHz signal is input through one of the AV sockets, and NTSC or AUTO has been selected for the AV COLOUR option (see P.35).

2 Press EXIT to return to the normal screen.

DNR

DNR (Digital Noise Reduction) can reduce the roughness of the picture.

1 Select DNR. Then press						or		to select ON or OFF.




	B R I G H T N E S S				2 5
	C O N T R A S T				2 5
	C O L O U R				2 5
	T I N T				0
	S H A R P N E S S				2 5
	D N R					O N /	O F F

		: SELECT						: ADJUST

EXIT : ENDMENU : RETURN

2 Press EXIT to return to the normal screen.

21

30E2825A_En_P18-24

21

1/15/07, 8:26 PM

Image 21

Contents Model 32W300P LCD Colour Television Resolution 1366 x 768 pixels FeaturesBattery notice Headphone WarningContents Air Circulation Safety PrecautionsWhere to install Installation and important informationLocation of controls Front Side Top Description of Indicators and ControlsLoudspeakers Remote sensorRemote Control Distance of Remote Control Operation Install the batteriesIf bright sunlight directly beams onto the unit front HandsetAntenna connection Back SideComponent input See P.33 Quick guide for Menu operation Call Menu and for example Select Auto TuningSelecting the video input source Per the description on previous PreparationOn-screen Language Selection Teletext Language SelectionPress or to select the desired language Automatic station presetting with the built-in Tuner Press To select the correct TVBroadcast colour system Then press Select CH Allocation Then press Changing the order of stored channelsManual TV station presetting Press or to select PAL or SECAM-L. Then press EnterWant to you can also stop the search Satellite Receiver To AV1 Scart-cable not supplied Connection to Satellite ReceiverChannel selection Basic OperationNicam stereo sound reception Stereo reception with the built-in tunerStereo reception in Germany Illuminates for approxNicam 2-channel sound reception not available GermanyChannel sound receptioninGermany Bass, Treble and Balance Select BASS. Then press or to adjust the bassTurning off the built-in speakers Using the surround sound featureBrightness, Contrast, Colour and Sharpness/DNR Brightness, Contrast, Colour and SharpnessSelect BRIGHTNESS. Then press Improved picture clarity Level you require Back lightSelecting the colour temperature Selecting the colour temperature/Blue backMode Picture Quality Blue backPicture format Manual format setting169 149Scrolling the picture in Cinema mode Scrolling the picture in Cinema mode/Auto 43 DefaultAuto 43 Default Or to select 43 or FullSelect PC input PC connectionLeft side view Monitor Display modesAudio Menu BASS/TREBLE/BALANCE Tone setting menu Press To select CONTRAST. Then press or To adjust ContrastSelecting the Hdmi audio input source Connecting an Hdmi or a DVI device to the Hdmi inputTeletext Switch on / off TeletextFastext/TOPtext Fastext/TOPtext is teletext with a special directoryDirectly Select Subpages Hold PagesExample EnlargementRestoring a Concealed Channel Conceal stored channelsConnecting other units to your TV Connection to other equipmentDVD player Connecting a Video camera or Games console Connecting an audio systemComponent output Audio output DVD player, select AV2 Input or AV2 Output Setting of Scart socket AV2AV colour adjustment AV colour adjustment/Power return featurePower return feature Menu, select AV Colour Or to select AutoTroubleshooting table/Specifications Troubleshooting tableSpecifications