Toshiba 32W300P Connecting an audio system, Connecting a Video camera or Games console

Page 33

Connection to other equipment

3.Connecting an audio system

This connection allows you to hear the TV sound through external speakers connected to an audio amplifier.

To control the audio through the amplifier turn on the TV and the amplifier set the volume of both to a moderate level, and turn off the TV’s built-in speakers (see “Turning off the built-in speakers” on P.20). Use a set of RCA/Phono cables to connect the TV to a suitable input on your hi-fi system as shown below.

Note:

If the volume of either the TV or the amplifier is set to 0 (or OFF), you will not hear any sound.

Note: The Bass/Treble/Balance adjustments (see P.19) only function with the sound from the TV speakers - it does not affect the audio output sockets.

TV (Left side view)

To VAR (variable)

AUDIO OUT

Stereo amplifier

Audio input

(Audio cable, not supplied)

4.Connecting a Video camera or Games console

Connect the Video camera (or Games console, etc.) to the TV with an appropriate AV cable (RCA/Phono) as shown. Select the AV3 input mode to view (see P.10).

Note:

When you input the PAL-M signal to AV3 input, select AV COLOUR setting to AUTO, otherwise the monochrome images will be displayed.

TV (Left side view)

Video camera

(example)

AV output

(AV cable, not supplied)

To AV3 IN

5.Connecting to a DVD player or other AV device with Component Video outputs

If your DVD player (or other device) has Component Video output jacks, use a suitable set of leads (RCA/ Phono) to connect these to the Component Video inputs on this TV as shown - it can greatly enhance the picture quality and performance. Please remember that you will also need to connect separate leads (RCA/Phono) for the audio signals. Select the COMPONENT input mode (see P.10).

TV (Left side view)

Audio cord (not supplied)

Video cord (not supplied)

To COMPONENT IN

Y Pb Pr

Component output Audio output

Note:	DVD player

The Component Video input of this unit are for use with equipment which outputs interlaced signals (PAL:		33
576i/1080i or NTSC: 480i/1080i) and progressive signals (PAL: 576p/720p or NTSC: 480p/720p).

30E2825A_En_P32-BACK

33

1/15/07, 8:27 PM

Image 33

Contents Model 32W300P LCD Colour Television Resolution 1366 x 768 pixels FeaturesBattery notice Headphone WarningContents Air Circulation Safety PrecautionsWhere to install Installation and important informationLocation of controls Front Side Top Description of Indicators and ControlsLoudspeakers Remote sensorRemote Control Distance of Remote Control Operation Install the batteriesIf bright sunlight directly beams onto the unit front HandsetAntenna connection Back SideComponent input See P.33 Quick guide for Menu operation Call Menu and for example Select Auto TuningSelecting the video input source Per the description on previous PreparationOn-screen Language Selection Teletext Language SelectionPress or to select the desired language Automatic station presetting with the built-in Tuner Press To select the correct TVBroadcast colour system Then press Select CH Allocation Then press Changing the order of stored channelsManual TV station presetting Press or to select PAL or SECAM-L. Then press EnterWant to you can also stop the search Satellite Receiver To AV1 Scart-cable not supplied Connection to Satellite ReceiverChannel selection Basic OperationNicam stereo sound reception Stereo reception with the built-in tunerStereo reception in Germany Illuminates for approxNicam 2-channel sound reception not available GermanyChannel sound receptioninGermany Bass, Treble and Balance Select BASS. Then press or to adjust the bassTurning off the built-in speakers Using the surround sound featureBrightness, Contrast, Colour and Sharpness/DNR Brightness, Contrast, Colour and SharpnessSelect BRIGHTNESS. Then press Improved picture clarity Level you require Back lightSelecting the colour temperature Selecting the colour temperature/Blue backMode Picture Quality Blue backPicture format Manual format setting169 149Scrolling the picture in Cinema mode Scrolling the picture in Cinema mode/Auto 43 DefaultAuto 43 Default Or to select 43 or FullSelect PC input PC connectionLeft side view Monitor Display modesAudio Menu BASS/TREBLE/BALANCE Tone setting menu Press To select CONTRAST. Then press or To adjust ContrastSelecting the Hdmi audio input source Connecting an Hdmi or a DVI device to the Hdmi inputTeletext Switch on / off TeletextFastext/TOPtext Fastext/TOPtext is teletext with a special directoryDirectly Select Subpages Hold PagesExample EnlargementRestoring a Concealed Channel Conceal stored channelsConnecting other units to your TV Connection to other equipmentDVD player Connecting a Video camera or Games console Connecting an audio systemComponent output Audio output DVD player, select AV2 Input or AV2 Output Setting of Scart socket AV2AV colour adjustment AV colour adjustment/Power return featurePower return feature Menu, select AV Colour Or to select AutoTroubleshooting table/Specifications Troubleshooting tableSpecifications