* To view | the hidden | areas (such | as | subtitles or | • A 480i, 480p, 720p, 1080i, 1080p, orVGA (60Hz) |
captions), | see below | "Scrolling | the | TheaterWide® | signal from the HDMI1/HDMI2 input |
picture (TheaterWide 2 and 3 only)". |
|
Scrolling the TheaterWide ® picture (TheaterWide 2 and 3 only)
You can set separate scroll settings for the TheaterWide 2 and TheaterWide 3 modes for each
input.
To set the scroll settings:
1 Press M_u and open the Picture menu.
2 Highlight Theater Settings and press @.
In the Picture Size field, select either TheaterWide 2 or TheaterWide 3 (you cannot
scroll in any other mode).
4 Press • to highlight the Picture Scroll field.
5 Press _ or _" to scroll the picture up and down as needed.
6 To save the new settings, highlight Doneand press
@.To revert to the factory defaults, highlight
Reset and press @.
Note: When receiving a signal at 480i resolution,
the picture scroll function may have limited
adjustment range.
Using the auto aspect ratio feature
When the auto aspect ratio feature is set to On, the TV will automatically select the picture size when one of the following input sources is received:
•A 480i, 480p, 720p, 1080i digital signal from the
ANT/CABLEinput
•A 480i signal from the Video or ColorStreamHD input
4:3 | normal |
| Normal | (with | sidebars) | ||
4:3 | letter box |
| TheaterWide | 2 |
| ||
16:9 | full |
| Full |
|
|
|
|
Not | defined | (no | The | current picture | size you set | ||
| under | "Selecting | the picture | ||||
HDMI aspect | data) | size" | on | page | 33. |
|
Note: The auto aspect ratio feature is not
applicable to PC input.
To turn on the auto aspect ratio feature:
1 Press _u and open the Picture menu.
2 Highlight TheaterSettingsand press @.
3 In the Auto Aspect Ratio field, select On.
4 To save the new settings, highlight Doneand press
@.To revert to the factory defaults, highlight
Reset and press @.
To turn off the auto aspect ratio feature: Select Off in step 3 above.
Selecting the cinema mode
When you view a DVD (3:2 pulldown processed)
from a DVD player connected to the Video,
ColorStream HD (component video), or HDMI inputs
on the TV, smoother motion can be obtained by setting the Cinema Mode to Film.
To set the Cinema Mode to Film:
(available for 480i and 1080i signals)
1Press ,_u and open the Picture menu.
2Highlight TheaterSettingsand press @.
3In the Cinema Mode field, select Film.
4To save the new settings, highlight Done and press
@.To revert to the factory defaults, highlight
Reset and press @.
To set the Cinema Mode to Video:
Select Videoin step 3 above.
35