Toshiba 34HF84 owner manual Connecting a cable converter box and VCR, UsingtheTV’s Features

Page 9

Connecting a cable converter box and VCR

This connection allows you to watch and record basic and premium cable channels, watch videotapes, and record one channel while watching another channel. To watch basic cable and use the TV’s features, select ANT-1.

To view premium channels or record with the VCR, select ANT-2, tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels.

You will need:

four coaxial cables

one set of A/V cables

From Cable

TV

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have a VCR with S-video, use an S- video cable (in the S-video jacks) instead of a standard video cable. Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time, or the picture performance will be unacceptable.

When you use a converter box with your TV, the remote control will not operate some features, such as programming your favorite channels, labeling channels, and locking channels.

The unauthorized recording, use, distribution, or revision of television programs, videot apes, DVDs, and other materials is prohibited under the Copyright L aws of the United St ates and other countrie s, and may subject you to civil and criminal liability.

Introduction

 

 

 

 

 

Connecting

yourTV

 

 

 

 

Usingthe

RemoteControl

 

 

Settingup

yourTV

 

 

 

 

IN

IN from ANT OUT to TV

 

 

 

OUT IN

 

 

 

 

CH 3

 

 

 

OUT

 

 

 

Cable converter box

CH 4

VIDEO

L

R

 

 

 

AUDIO

 

Stereo VCR

UsingtheTV’s Features

 

Appendix

 

 

Index

 

9

Image 9
Contents 34HF84 Dear Customer Safety PrecautionsInstallation Important Safety InstructionsCare ServiceImportant Safety Information Introduction Usingthe RemoteControl Introduction Connecting YourTVSettingup YourTV UsingtheTV’s Features Appendix Index Welcome to ToshibaFrom Antenna or Cable Connecting your TVConnecting a cable converter box Connecting a VCRFrom Cable Box or Antenna Stereo VCR From CableConnecting a cable converter box and VCR UsingtheTV’s FeaturesYou will need Four coaxial cables One set of A/V cables From Connecting a DVD player or satellite receiver and a VCRAntenna DVD Player Satellite Satellite Receiver DishDVD player with component video From Antenna Stereo VCRDTV Receiver with component video From DTV AntennaConnecting a camcorder Connecting two VCRsUsing Appendix IndexTo connect an Hdmi device, you will need One Hdmi cable type a connectorAmplifier Connecting an audio systemInstalling the remote control batteries Preparing the remote control for useIf you have a Toshiba device Squeeze tab and lift coverRemote control codes IntroductionFor future reference, write down the codes you used Htib Introduction Connecting YourTV Control 100Begins playback of a tape or DVD Connecting YourTV Control Learning about the remote controlAdjusts the volume level POP Direct CH allows direct access to POP channelsTV front panel Learning about the menu systemSelecting the antenna input Changing the on-screen display languageYour Press y or z to highlight your desired languageUsingthe Features Connecting YourTV Usingthe RemoteControl Settingup TV’sAdding channels to the TV’s memory Programming channels automaticallyUsingthe n RemoteControl Adjusting the tilt correction featureChanging channels Adding and erasing channels manuallySwitching between two channels using Channel Return Adjusting the channel settingsSwitching between two channels using SurfLock Programming your favorite channelsSettingup yourTV Connecting Your Usingthe RemoteControlPress y or z to highlight Favorite CHUsingtheTV’s Features Appendix Labeling channelsClear Usingthe RemoteControl Settingup YourTV TV’s Connecting yourTVSelecting the picture size Conventional picture on aNot stretched taller None of the picture is hidden Setting yourPress Enter to display the Scroll Adjustment mode To raise the picture, press yTo lower the picture, press z Using the Auto Aspect feature Press y or z to highlight Auto ASPECT, and then pressPress y or z to select ON, and then press Enter Using the POP double-window feature Switching the speaker sound of main and POP programs Switching the main and POP picturesExample Press Purple Example PressDouble-Window aspect ratio Using the programmed channel search functionAbout the auto favorite feature Using the favorite channel search functionMoving picture Purple Moving pictureUsing the V-CHIP menu Using the Locks menuEntering the PIN code If you cannot remember your PIN codeTV Rating Independent rating system for broadcasters Enable BlockingIntroduction Connecting YourTV Usingthe RemoteControl Mpaa Rating Independent rating system for moviesUp TV Settingup YourTV UsingtheTV’s Features Using RemoteLocking channels Unlocking programs temporarilyPress y or z to highlight Clear ALL, and then press Enter Connecting yourUsing Remote Settingup YourTV TheTV’s Introduction ConnectingUsing Features Locking the video inputsSelecting the picture mode Adjusting the pictureAdjusting the picture quality Picture SettingsSelecting the color temperature Press x or to select the mode you preferSaving new preference Using the CableClear DNR feature Resetting picture adjustmentsDone Selecting the display format for 480p signal only Selecting the cinema modePress y or z to select Film auto Selecting the video input source Using the TV’s Features Appendix IndexUsing the closed caption feature Press y or z to highlight Caption or TEXT, and then pressTo view text, highlight T1, T2, T3, or T4 Setting the sleep timer Setting the on timerPress y or z to highlight Clock SET, and then press Enter To set the clockPress Enter to start the clock To display the time on-screen Press RecallAdjusting the sound Muting the soundSelecting stereo/SAP broadcasts Adjusting the sound quality Using the WOW surround sound featurePress y or z to adjust the item, then press Enter Audio Settings menu appearsResetting your audio adjustments Using the StableSound featureTo turn off the StableSound feature Select OFF in above Selecting the Audio OUT sound Turning off the built-in speakersTo turn on the built-in speakers Select on in above Press y or z to select Main or POP, and then press EnterUnderstanding the last mode memory feature Understanding the auto power off featureSelecting the background of the menu display Displaying on-screen informationAppendix SpecificationsAntenna TroubleshootingBlack box appears on the screen T2, T3, or T4. Turn closed captioning OFFLimited United States Warranty Limited Canada Warranty Index Manufactured by Page Page