Toshiba 19SL410U Displaying TV status information, Understanding the last mode memory feature

Chapter 6: Using the TV’s features

5 To save the new settings, highlight Done and press

. To revert to the factory defaults, highlight Reset and press .

Displaying TV status information

To display TV status information using

RECALL:

Press on the remote control.

The following information will display (if applicable):

•Current input (ANT/CABLE, Video, etc.)

•If ANT/CABLE is the current input, either “CABLE” (for cable TV) or “ANT” (for over-the- air broadcasts).

•Channel number (if in ANT/CABLE mode)

•Channel label (if applicable)

•Digital signal strength indicator (bar graph in lower right corner of box; for ATSC signal only)

•Stereo, Mono, or SAP audio status (when HDMI input mode, Dolby Digital or PCM)

•Video resolution

•Aspect ratio of incoming video signal (4:3 or 16:9)

•V-Chip rating status

•Game Timer (if set)

To close the RECALL screen:

Press again.

To display TV status information using INFO:

Press on the remote control.

The following additional information will display for off air digital channels (if applicable):

•Title

•Duration

•Detailed description

Sor T while the RECALL or INFO display is onscreen.

Understanding the last mode memory feature

If power is lost while you are viewing the TV, the Last Mode Memory feature automatically turns on the TV when power is restored.

Note: If you will be away from the TV for an extended period of time you should unplug the power cord.

Note: The location of the banner can be moved to the top or bottom of the screen by pressing

50