Toshiba 42WLT66A, 32WLT66A Using the picture still, Adjusting the picture position analog only

Using the TV’s features (General)

Using the picture still

• Press R to freeze the picture.

Even if an image is frozen on the TV screen, the pictures are running on the input source. Audio continues to be output as well.

To return to a moving picture, press R again.

(Moving) (Still)

Notes:

•If you use this function except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws.

•In the PC input mode (- page 25), this function is not available.

Adjusting the picture position - analog only -

Adjustment to the position of the picture may be made to suit your viewing preferences.

1 Press M, then press I or i to display the SET UP menu. 2 Press the u or U to select Picture position.

SET UP
Language	English
Auto tuning	OK
Manual tuning	OK
ANT ATT	Off
AV connection	OK
Picture position	OK
MENU Back EXIT Watch TV

3 Press Q, then press u or U to select an item you want to adjust.

Picture position

Horizontal position	0
Vertical position	0
Reset	OK

MENU Back EXIT Watch TV

4 Press I or i to adjust the settings as required.

Horizontal position 0

Note:

When the picture format is in Wide or 4:3 mode, only the Horizontal position can be adjusted.

Resetting the picture position - analog only -

This function resets your picture position settings to the factory settings.

1 From the Picture position menu, press u or U to select Reset.

2 Press Q.

Selecting the picture mode

You can select the picture quality instantly among three preset modes and one user-set mode.

•Press N to select the desired picture quality.

Dynamic

Mode	Picture quality
q Dynamic	bright and dynamic picture
q Standard	standard picture
q Mild	soft picture
q Memory	the picture quality you set

Note:

In the PC input mode (- page 25), this mode is not available.

Adjusting the basic picture quality

1 In Digital TV, press M, then press I or i to display the TV set up then press Q.

2 Press I or i to display the PICTURE menu.

3 In Analog TV, press M and I or i to display the

PICTURE menu.

PICTURE
Picture settings	OK
3D Color management	Off
Base color adjustment
Cinema mode	On

MENU Back EXIT Watch TV

4 Press u or U to select the Picture settings menu, then press Q.

Picture settings	1/2
Back light	100
Contrast	100
Brightness	50
Color	50
Tint	0
Sharpness	0

MENU Back EXIT Watch TV

5 Press u or U to select an item you want to adjust, then press I or i to adjust the settings as required.

Contrast 100

Selection	I	Pressing	i
Back light	darker		lighter
Contrast	lower		higher
Brightness	darker		lighter
Color	paler		deeper
Tint	reddish		greenish
Sharpness	softer		sharper
Notes:

•The Tint may only be adjusted on a tape which has been recorded and played back on an NTSC VCR.

•In the PC input mode (- page 25), Color, Tint and Sharpness modes are not available.

19