Toshiba 32WLT66A, 37WLT66A Activating the black stretch, Activating the DNR Digital Noise

Using the TV’s features (General)

Activating the black stretch

This function increases the strength of dark areas of the picture which improves definition.

1 From the Picture settings menu, press u or U to select Black stretch on the 2nd page.

Picture settings	2/2
Black stretch	On
MPEG NR	Low
DNR	Auto
Color Temperature	Cool
MENU Back EXIT Watch TV

2 Press I or i to select On or Off.

Black stretch On

Note:

In the PC input mode (- page 25), this mode is not available.

Activating the MPEG NR (Noise Reduction)

If the receiving signal of MPEG is a mosquito (grained) noise depending on the compression and conversion, the noise may be reduced when using this function.

1 From the Picture settings menu, press u or U to select MPEG NR on the 2nd page.

2 Press I or i to select Off, Low, Middle or High.

MPEG NR High

Note:

In the PC input mode (- page 25), this mode is not available.

Activating the DNR (Digital Noise

Reduction) - analog only -

If the receiving signal is weak and the picture is blurry, the picture may be improved when using this function.

1 From the Picture settings menu, press u or U to select DNR on the 2nd page.

2 Press I or i to select Auto, Off, Low, Middle or High.

DNR Auto

Note:

This function is available for 480i and 576i signals.

Selecting the color temperature

You can change the tone of the picture by selecting from three preset color temperatures: Cool, Normal or Warm.

1 From the Picture settings menu, press u or U to select Color Temperature on the 2nd page.

2 Press I or i to select mode you prefer.

Color Temperature Cool

Cool: Lends a blue hue to the picture.

Normal: Neutral

Warm: Lends a red hue to the picture.

Adjusting the color management

You can adjust the picture color quality by selecting from 6 base color adjustments : Red, Green, Blue, Yellow, Magenta or Cyan.

1 Press M, then press I or i to display the PICTURE menu.

2 Press u or U to select 3D Color management, then press I or i, then press I or i to select On.

3D Color management On

3 Press Q, then press u or U to select Base color adjustment.

4 Press Q, then press u or U to select an item you want to adjust.

5 Press i, then press I or i to select Hue, Saturation or

Brightness.

Base color adjustment

		Hue	Saturation	Brightness
	Red	0	0	0
	Green	0	0	0
	Blue	0	0	0
	Yellow	0	0	0
	Magenta	0	0	0
	Cyan	0	0	0
Reset				OK
MENU Back		EXIT Watch TV

6 Press u or U to adjust the settings as required.

	Hue	Saturation		Brightness
Red
	0		0		0

Notes:

•If you select color management Off mode, this mode is not available.

•In the PC input mode (- page 25), this mode is not available.

Resetting the base color adjustment

The Reset function adjusts the base color adjustment to the factory settings.

1 From the Base color adjustment menu, press u or U to select Reset.

2 Press Q.

20