Initial Installation - Digital & Analogue
Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your television. To set up the television use the buttons on the remote control as detailed on page 4.
1.Connect the mains plug and switch the TV into standby using the side On/Off switch. Press any numbered or standby button on the remote control, then the language selection menu will be displayed. This screen will appear the first time that the television is switched on and each time the television is reset.
2.By pressing the Up or Down buttons highlight the language you want to set and press OK button.
3.Afterwards, active antenna selection menu screen is displayed. You can set active antenna mode as on or off by using Left or Right buttons.
If an active antenna is connected to your TV, you can select this option as On. Antenna power should be Off when standard antenna is used instead of the active antenna. See Configuration Menu in the following sections for more information.
4.Press OK button to save active antenna preference. Afterwards, the following message will be displayed on the screen:
5.Select Yes by using Left or Right buttons and press OK to continue. The Auto tuning screen will appear and the television will start to search for available stations. The progress bar will move along the line. You must allow the television to complete the search.
6.After Automatic Search is completed, the following message asking for analogue channel search appears on the screen. Select Yes by using Left or Right buttons and press OK to continue.
7.Select your Country, Language and Text language by using navigation buttons. Press OK or RED button to continue. To cancel, press the BLUE button.
Note:
•For proper functioning of digital teletext in DTV mode, you should set country as UK in analogue AUTO PROGRAM (for UK broadcasts only).
•Do not turn off the TV while initializing first time installation.
English - 11 -
00_MB35_[GB]_3910UK_IDTV_NICKEL1_40740W_(IB_QSG)_10069763_50176572.indd 11 | 16.09.2010 09:36:45 |