Basic Operations

Selecting Programme Positions

To select a programme position use the numbered buttons on the remote control. Programme positions can also be selected using P+ and P- .

Press INFO to display the on-screen information i.e. programme position, stereo/mono signal and picture format. To revert to the previous programme position press (SWAP).

Stereo and Bilingual Transmissions

For ATV programmes

If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time posi- tions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear.

Stereo… Press LANG. to select Stereo or Mono.

Bilingual… Bilingual transmissions are rare. If they are transmitted, the word Dual will be displayed. Choose the required programme number, and if the word Dual appears, press LANG. to select Dual 1, Dual 2 or Mono.

For DTV Programmes

To view current language and for changing to an alternative language (if available), press LANG. button. Available op- tions will be listed.

Controlling Volume and Muting Sound

Volume

Press V+ or V- to adjust the volume.

Sound Mute

Press “” once to turn the sound off and again to cancel.

Viewing Main Menu

•Press “”/ “” buttons on the TV at the same time to view main menu.

•Press MENU button on the remote control to view main menu.

Input Selection

Use the Input Selection window if the television does not switch over to a connected source automatically.

•PressSOURCEbuttononyourremotecontrolfordirectly changing sources. Or select Source option from the main menu by using Left or Right button. Use then Up or Down button to highlight an input and press Right button to select.

Note: You can mark desired source options by

pressing the OK button. Therefore, when SOURCE button is pressed, only the marked source options will be available (except for the TV source).

English - 12 -

00_MB35_[GB]_3910UK_IDTV_NICKEL1_40740W_(IB_QSG)_10069763_50176572.indd 12

16.09.2010 09:36:45