Toshiba 50HP86, 42HP86 appendix Setting the on timer

Page 31

Setting the ON timer

This feature allows you to program the TV to turn on automatically at a set time. If you program the ON TIMER to “DAILY,” the TV will turn on every day at the same time to the same channel until you clear the ON TIMER.

To set the ON timer: (Example: Turning on the TV to channel 2 at 6:30 AM, DAILY)

1.Press TV to select the TV mode.

2.Set the clock, if you have not already done so (see page 30.)

3.Press MENU, then press or to display the OPTION menu.

4.Press ▲ or ▼ to highlight ON TIMER.

5.Press or to highlight SET, then press ENTER. The ON TIMER menu appears. Press to set the time.

6.Press ▲ or ▼ to set the desired hour, then press .

Note:

After a power failure or disconnection of the power, the timer settings will be lost.

INPUT DISPLAY

		TV
ON TIMER
ON TIMER
6: 30 AM		CH 002
		CLEAR
RETURN		Menu/
		Menu/
		Enter
SELECT		ADJUST
7. Set the desired minutes and channel, as in step 6.
8. Press	or	to select ONCE or DAILY, then press ENTER.
ON TIMER		Exit
ON TIMER		Exit
6:30AM		CH 002
		ONCE / DAILY / CLEAR
RETURN
SELECT		ENTER:SET

9. Press EXIT to return to normal viewing.

To cancel the on timer:

Select CLEAR in step 8, above.

Setting the sleep timer

You can use the sleep timer to automatically turn off the TV at a set time.

To set the sleep timer:

Repeatedly press SLEEP on the remote control to set the length of time until the TV turns off. The clock will increase 10 minutes for each press of the SLEEP button (0h00m, 0h10m, ...1h50m, 2h00m.) After the sleep timer is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating.

To confirm the sleep timer setting:

Press SLEEP one time. The remaining time will be momentarily displayed.

INPUT DISPLAY

TV

Introduction

Connecting your TV

Setting up your TV

Using the TV’s Features

To cancel the sleep timer:

Repeatedly press SLEEP until the display turns to 0h00m.

Sleep

Note:

If the remote control does not operate your TV, press the “TV” button on the remote control and try again.

31

Appendix

30A0121A_En_p31-40

31

5/26/06, 6:26 PM

Image 31

Contents 42HP86 50HP86 Child Safety Important Safety Instructions Care Important notes about your Plasma TV Introduction Connecting your TVSetting up your TV Using the TV’s featuresFront Features of your new TVRemote control Exploring your new TVRight back panel Selecting a location for the TVBack of TV Left back panelConnecting a VCR Connecting a cable converter box or antennaFrom Cable Connecting a DVD player/satellite receiver and a VCR DVD player with Component video For an Hdmi connection, see Connecting a camcorder To connect an Hdmi device, you will need Connecting an Hdmi or DVI deviceTo connect a DVI device, you will need You will need One pair of standard audio cables Connecting an analog audio systemTo control the audio TV back panelTo connect the IR blaster cable YourTVPower connection Connecting a PC personal computerMonitor display modes Using the remote control to operate your other devices Using the remote controlPreparing the remote control for use Installing the remote control batteriesTo control a DVD player Programming the remote control to operate your other devicesVCR DVD Remote control effective range Learning about the remote controlApprox ft meters Changing the on-screen display language Starting setupTo select a language Changing channels Adding channels to the TV’s memoryProgramming channels automatically Adding and erasing channels manuallyChannels Press Exit to return to normalViewing Repeat steps 1-8 for the otherTo change your password Using the Locks menuSelecting a password To select your password and access the Locks menuTo unlock channels To set up the video lockLocking channels Locking the video inputsUsing the panel lock feature Setting the GameTimerTMTo erase channel labels Labeling channelsTo create channel labels Repeat to enter the rest of the charactersTo label the video input sources Setting the clockSelecting the video input source Labeling the video input sourcesSetting the on timer Picture size, as described below and on the next Selecting the picture sizeTheaterWide 3 picture size example TheaterWide 2 picture size exampleTo raise the picture, press Scrolling the TheaterWide picture TheaterWide 2 and 3 onlyTo lower the picture, press Aspect ratio of signal source Selecting the cinema modeUsing the Aspect feature To set the Cinema Mode to Video offTo turn off the Closed Caption feature Using the closed caption featureTo view captions or text Picture shift Using the Long Life featureReverse WhiteSelecting the picture mode Adjusting the pictureAdjusting the picture quality Selecting the color temperature Using the CableClear featureResetting your picture adjustments Muting the sound Adjusting the soundAdjusting the sound quality To adjust the sound qualityUsing the StableSound feature Resetting your audio adjustmentsTurning off the built-in speakers To select the Hdmi audio input source Using the SRS WOW surround sound featureTo adjust the WOW feature Selecting the Hdmi audio input sourceDisplaying TV status information on-screen WOW TruBass Picture/Audio adjustments in PC modeResetting your picture/audio adjustments in PC mode To reset your picture/audio adjustmentsText mode Auto power offUnderstanding the Power Return feature Troubleshooting30A0121AEnp45-bc 26/06, 626 PM Input 1V p-p, 75 ohm, negative sync., Mini DIN 4 pin x SpecificationsInput 0.286V p-p burst signal, 75 ohm 42HP86 50HP86Limited Canadian Warranty For Toshiba Brand Plasma Television Models from previous Service Centers