Toshiba 46XF550U, 2XF550U Connecting an audio system, To control the audio, Standard audio cables

Page 18

Turn on the TV and the stereo amplifier.

Chapter 2: Connecting your TV

Connecting a digital audio system

The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby®* Digital g or 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dolby® Digital decoder or other external audio system with optical audio input.

You will need:

•optical audio cable (Use an optical audio cable that has the larger “TosLink” connector and not the smaller “mini- optical” connector.)

Dolby Digital decoder or other digital audio system

LINE IN		Optical
L	R	Audio IN

TV lower back panel

To control the audio:

1 Turn on the TV and the digital audio device.

2 Press Yon the TV’s remote control and open the Audio menu.

3 Highlight Audio Setup and press T.

Audio

Digital Audio Selector

Audio Settings

Advanced Audio Settings

Audio Setup

4 In the Optical Output Format field, select either Dolby Digital or PCM, depending on your device (- “Selecting the optical audio output format” on page 52).

Audio Setup

PC Audio	No
HDMI 1 Audio	Auto

MTS	Stereo

Language	English

Optical Output Format	Dolby Digital
Dolby Digital

Note:

•Some audio systems may not be compatible with Dolby Digital bitstream signals. Older audio systems that are not compatible with standard optical out signals may not work properly, creating a high noise level that may damage speakers or headphones. THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY.

•The DIGITAL AUDIO OUT terminal may not output some digital audio sources because of copy restrictions.

*Manufactured under license from Dolby Laboratories.

Dolby, and the double-D symbol are registered trademarks of Dolby Laboratories.

Connecting an audio system

This connection allows you to use external speakers with an external analog audio amplifier to adjust the sound level.

You will need:

•standard audio cables

Analog audio amplifier

LINE IN

L R

TV upper back panel

To control the audio:

1

2 Minimize the sound volume from the TV’s built-in speakers and control the volume level using the amplifier’s remote control.

Dynamic Range Control

Compressed

ResetDone

18

Image 18

Contents 40XF550U 46XF550U 52XF550U Tune Into Safety Safety PrecautionsIssue Dear CustomerAdditional Safety Precautions Important Safety InstructionsInstallation, Care, and Service InstallationService CareTo Display your LCD TV on the included Pedestal Stand To Display your LCD TV using a Wall BracketChoosing a location for your LCD TV Removing the Pedestal StandPart Important notes about your LCD TVTrademark Information Contents Troubleshooting Features of your new TV IntroductionTV front and side panel controls and connections Green and Yellow LEDsEffective range TV back panel connections For an explanation of cable types and connections, see pagesConnecting your TV Overview of cable typesAbout the connection illustrations To view basic and premium Cable channels To view the antenna or Cable signalYou will need To view the VCRTo view the VCR or view and record antenna channels To view antenna or Cable channelsTo view the DVD player To record a TV program while watching a DVDTo connect the IR blaster cable To control the devicesIf you cannot locate the device’s infrared sensor To view the Hdmi device video Connecting an Hdmi or DVI device to the Hdmi inputTo connect an Hdmi device, you will need To connect a DVI device, you will needREGZA-LINK connection Before controlling the devicesHdmi cables Connecting an audio system To control the audioStandard audio cables To connect a PC to the PC in terminal on the TV Connecting a personal computer PCSignal To connect a PC to the Hdmi terminal on the TVInstalling the remote control batteries Using the remote controlPreparing the remote control for use If you have a Toshiba deviceTV, CABLE/SAT, HD DVD, DVD, and VCR/PVR. Press TV until the keypad blinks 3 times to control the TVRemote Control functional key chart PVR= key does not send a signal in that remote control mode Mode Select Default device mode control before programming Using the remote control to operate your other devicesDevice code setup Mode Select Device mode control after programmingTo unlock the remote control’s volume keys Using the volume lock featureOperational feature reset To reset the remote controlTVs Cable boxesSatellite receivers DVDs 3D LABHD DVDs DVD/VCR ComboVCRs KEC STS DBS/PVR Combo PVRsCable/PVR Combo Audio AmpAudio Amp/Tuners SAEMain menu layout Setup/Installation menu layoutMenu layout and navigation Thinc menuNavigating the menu system ApplicationsSetting up your TV Setting the Demo ModeSelecting the menu language Programming channels automatically Configuring the input source for the ANT/CABLE terminalTo configure the ANT/CABLE input source To program channels automaticallySetting the Auto Input feature Manually adding and deleting channels in the channel memoryLabeling channels Setting the Hdmi audio mode Viewing the digital signal meterSetting the time zone Reset Factory Defaults Selecting the Power-On ModeSelecting the Demo Mode Viewing the system statusUsing the TV’s features Labeling the video input sourcesTo label the video input sources Tuning channels Tuning channels using Channel BrowserFavorites Browser Elements of the Channel Browser Tuning to a specific channel programmed or unprogrammed Setting the Channel Tuning ModeTuning to the next programmed channel Adding and clearing channels and inputs in the History ListTo select the picture size using the remote control Switching between two channels using Channel ReturnSwitching between two channels using SurfLock To select the picture size using the menusTheaterWide For letter box programs Picture Size NaturalTheaterWide For 43 format programs TheaterWide For letter box programs with subtitlesTo turn on the auto aspect ratio feature Using the auto aspect ratio featureTo set the scroll settings To turn off the auto aspect ratio featureSelecting the picture mode Using the Freeze featureAdjusting the picture Adjusting the picture qualityUsing the TheaterLock feature Using the closed caption modeBase closed captions Using the Closed Caption button on the remote control Adjusting the audioDigital CC Settings CC SelectorUsing the digital audio selector Adjusting the audio qualitySelecting stereo/SAP broadcasts Using the Dolby Digital Dynamic Range Control feature Using the Locks menuUsing the StableSound feature Entering the PIN codeChanging your PIN code Press b to highlight Enable Rating BlockingIf you cannot remember your PIN code Blocking TV programs and movies by rating V-ChipTo download the additional rating system if available Blocking channels Using the input lock featureUsing the GameTimer Unlocking programs temporarilyTo adjust the PC settings Using the PC settings featureUsing the control panel lock feature To lock the control panelUsing REGZA-LINK Setting the PC AudioSetting the sleep timer REGZA-LINK playback device HD DVD player, etc. controlOther REGZA-LINK functions Volume and Mute controls of Audio ReceiverREGZA-LINK input source selection REGZA-LINK Player Control menu functionsUsing the Hdmi settings feature To set the REGZA-LINK SetupTo set the Hdmi Settings To display TV status information using Recall Understanding the auto power off featureUnderstanding the last mode memory feature To display TV status information using InfoUsing dynamic contrast Using the TV’s advanced featuresUsing the advanced picture settings features Using the static gamma featureUsing the ClearFrame feature Using the Film Stabilization featureUsing CableClear digital noise reduction Using Mpeg noise reduction Using the ColorMaster featureUsing Color Palette Adjustment Using the Game Mode feature Using the advanced audio settings featuresUsing x.v.Color Selection feature Using the SRS WOW surround sound featureTroubleshooting General troubleshootingLED indications Green blinks quickly Green blinks slowly Yellow blinks slowlySpecifications AppendixAcceptable signal formats for PC in and Hdmi terminals Format Resolution Frequency Pixel Clock Frequency1280 60.020Hz 63.981kHz 108.000MHz Limited United States Warranty For LCD Televisions 26 and LargerLimited Canadian Warranty For Toshiba Brand Flat Panel TelevisionsDisclaimer and Limitation of Remedy Index Freeze08-01