Toshiba 47LX196 manual Connecting a camcorder, To view the camcorder video, To control the audio

196LCD_Inst.book Page 14 Friday, May 26, 2006 11:19 AM

Connecting your TV

Connecting a camcorder

You will need:

•standard A/V cables

–For better picture performance, if your camcorder has S-video, connect an S-video cable (plus the audio cables) to VIDEO 1 on the TV back instead of the VIDEO 2 on the TV right side panel.

Camcorder

VIDEO	AUDIO
	OUT
	L
	R

VIDEO 2 inputs on TV right side panel

To view the camcorder video:

Select the VIDEO 2 video input source on the TV.*

*To select the video input source, press INPUT on the remote control (-Operating Guide). To program the TV remote control to operate other devices, see the Operating Guide, Chapter 2.

Connecting a digital audio system

The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby®* Digital gor 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dolby® Digital decoder or other external audio system with optical audio input.

You will need:

•optical audio cable (Use an optical audio cable that has the larger “TosLink” connector and not the smaller “mini- optical” connector.)

Dolby Digital decoder or other digital audio system

To control the audio:

1 Turn on the TV and the digital audio device.

2 Press MENU on the TV’s remote control and open the Audio menu.

3 Highlight Audio Setup and press ENTER.

Audio

Audio Settings

Advanced Audio Settings

Audio Setup

4 In the Optical Output Format field, select either Dolby Digital or PCM, depending on your device (-“Selecting the optical audio output format” in the Operating Guide).

Audio Setup

MTS		Stereo
Language		English
Speakers		On
Optical Output Format		Dolby Digital
	Reset	Done

5 Turn off the TV’s built-in speakers in the same Audio Setup menu (for 42LX196 and 47LX196 only). Also see “Turning off the built-in speakers” in the Operating Guide.

Note:

•Some audio systems may not be compatible with Dolby Digital bitstream signals. Older audio systems that are not compatible with standard optical out signals may not work properly, creating a high noise level that may damage speakers or headphones. THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY.

•The DIGITAL AUDIO OUT terminal outputs signals only when receiving digital broadcasts with the TV in single- window mode.

•The DIGITAL AUDIO OUT terminal may not output some digital audio sources because of copy restrictions.

*Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are registered trademarks of Dolby Laboratories.

LINE IN		Optical
L	R	Audio IN

TV lower back panel

14

196 LCD Inst (E/F) Web 213:276