GENERAL ADJUSTMENTS
REPLACEMENT OF THE CRT
Service parts are provided for each R, G and B.
The contents of the parts are as follows.
| R | G | B |
|
|
|
|
50A50 | 23796001 | 23005397 | 23796003 |
50A60 | 23005114 | 23005115 | − |
HITACHI | 23005242 | − | − |
55A60 | |||
CRT | 23005249 | − | 23796486 |
61A60 | |||
|
|
|
|
REPLACEMENT OF HIGH VOLTAGE CABLE
SPECIFIC INFORMATIONS
ANODE LEAD
RUBBER BOOT
LEAD HOLDER
Fig. a
Z450 TPA5007
1.When replacing Anode Lead or Anode Cap with new one, remove Lead Holder from old lead as shown in figure below, and put it on new lead. Do not throw away Lead Holder.
NOTE : THE LEAD HOLDER IS ATTACHED TO TPA5007 (Z450), BUT IS NOT ATTACHED TO ANODE LEAD AND ANODE CAP. RUBBER BOOT IS ATTACHED TO ANODE LEAD AND ANODE CAP.
2. Detaching Lead Holder
OLD
RUBBER BOOT ANODE LEAD or
ANODE CAP
LOCK LEAD HOLDER Cut here rubber boot and lead together to detach Lead Holder.
Fig. b
– 8 –