Toshiba 47WLT66 3D Colour management, Base colour adjustment, Cinema mode, Antenna amplifier

Picture controls continued

3D Colour management

When 3D Colour management is selected it allows the ‘Base colour adjustment’ feature to become available.

1In the PICTURE menu press Q to select 3D Colour management.

		PICTURE
Picture settings			OK
3D Colour management			On
Base colour adjustment			OK
Cinema mode			Off
MENU Back	EXIT	Watch TV

2Press S or R to select On or Off.

Base colour adjustment

The Base colour adjustment feature allows the adjustment of individual colours to suit personal preference. This can be useful when using an external source.

1In the PICTURE menu press Q to select Base colour adjustment, then press OK.

		PICTURE
Picture settings			OK
3D Colour management			On
Base colour adjustment			OK
Cinema mode			Off
MENU Back	EXIT	Watch TV

2Press P and Q to select an option, then R to adjust the settings.

Base colour adjustment

		Hue	Saturation	Brightness
	Red	+2	+6	+4
	Green	0	0	0
	Blue	0	0	0
	Yellow	0	0	0
	Magenta	0	0	0
	Cyan	0	0	0
Reset				OK
MENU Back		EXIT Watch TV

To return to the original factory settings select Reset and press OK.

Cinema mode

If there are lines or jagged edges in the film or programme being viewed, selecting Cinema mode can help correct this by smoothing out the picture.

1In the PICTURE menu press Q to select Cinema mode.

2Press S or R to select On or Off.

Antenna amplifier

If the signal being received by the television is too strong, this may result in picture interference and/or a buzzing sound. Setting Antenna Amplifier to Off reduces the signal strength, and can help to remove the interference.

1In the SET UP menu press Q until Antenna Amplifier is highlighted.

2With S or R select either On or Off.

	SET UP	1/2
Language		English
Country		UK
Auto tuning		OK
Manual tuning		OK
Antenna Amplifier		On
AV connection		OK
MENU Back	EXIT Watch TV

22