Toshiba MFL67652602 1303 REV00, 60LA8600 Tint Command k j, ColorColour Temperature Command x u

Page 48

8EXTERNAL CONTROL DEVICE SETUP

ENGLISH

09. Tint (Command: k j)

►►To adjust the screen tint.

You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr]

Data Red : 00 to Green : 64

Ack [j][ ][Set ID][ ][OK/NG][Data][x]

14. Color(Colour) Temperature (Command: x u)

►►To adjust colour temperature. You can also adjust Color(Colour) Temperature in the PICTURE menu.

Transmission [x][u][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64

Ack [u][ ][Set ID][ ][OK/NG][Data][x]

10. Sharpness (Command: k k)

►►To adjust the screen sharpness.

You can also adjust sharpness in the PICTURE menu.

Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 32

Ack [k][ ][Set ID][ ][OK/NG][Data][x]

11. OSD Select (Command: k l)

►►To select OSD (On Screen Display) on/off when controlling remotely.

Transmission [k][l][ ][Set ID][ ][Data][Cr]

Data 01 : OSD off

01 : OSD on

Ack [l][ ][Set ID][ ][OK/NG][Data][x]

12. Remote control lock mode (Command: k m)

►►To lock the front panel controls on the monitor and remote control.

Transmission [k][m][ ][Set ID][ ][Data][Cr]

Data 01 : Lock off

01 : Lock on

Ack [m][ ][Set ID][ ][OK/NG][Data][x]

*If you are not using the remote control, use this mode.

When main power is off & on (plug-off and plug-in, after 20 - 30 seconds), external control lock is released.

*In the standby mode (DC off by off timer or ‘ka’, ‘mc’ command), and if key lock is on, TV will not turn on by power on key of IR & Local Key.

13. Balance (Command: k t)

►►To adjust balance.

You can also adjust balance in the AUDIO menu. Transmission [k][t][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [t][ ][Set ID][ ][OK/NG][Data][x]

15. ISM Method (Command: j p) (Only Plasma TV)

►►To control the ISM method. You can also adjust ISM Method in OPTION menu.

Transmission [j][p][ ][Set ID][ ][Data][Cr]

Data Min : 02: Orbiter 08: Normal

20:Color(Colour) Wash Ack [p][ ][Set ID][ ][OK/NG][Data][x]

16.Energy Saving (Command: j q)

►►To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu.

Transmission [j][q][ ][Set ID][ ][Data][Cr]

Data

00 : Off

01 : Minimum

02 : Medium

03 : Maximum

04 : Auto

05 : Screen off

* (Depending on model)

Ack [q][ ][Set ID][ ][OK/NG][Data][x]

17. Tune Command (Command: m a)

*This command may work differently depending on model and signal.

•For Europe, Mid-East, Colombia, Asia except

South Korea and Japan, Model

►►Select channel to following physical number. Transmission [m][a][ ][Set ID][ ][Data 00][ ] [Data 01][ ][Data 02][Cr]

* Analogue Terrestrial/Cable

[Data 00][Data 01] Channel Data Data 00 : High byte channel data Data 01 : Low byte channel data

- 00 00 ~ 00 C7 (Decimal : 0 ~ 199)

Data 02 : Input Source (Analogue)

-00 : Terrestrial TV (ATV)

-80 : Cable TV (CATV)

Page 47 Page 49
Image 48
Page 47 Page 49
Contents LED TV Important Safety Instructions EnglishEnglish YyDisconnecting the Main Power YyGroundingYyOutdoor Antenna Grounding YyMovingPreventing Image burn or Burn-in on your TV ScreenYyDot Defect For USA and Canada YyGenerated SoundViewing 3D Imaging Viewing EnvironmentThose that have a photosensitive seizure or chronic illness Viewing AgeLicenses Open Source Software NoticeTable of Contents Assembling and Preparing Unpacking10 mm 0.39 inches *B 18 mm 0.7 inches Stand Screws Stand Base Tag OnOptional Extras AN-MR400 AG-FParts and Buttons Button DescriptionLifting and moving the TV Setting up the TV Attaching the standMounting on a table Leave a 10 cm 4 inch minimum space fromTidying cables Securing the TV to a wall optionalMounting on a wall ModelOptional Using Built-in Camera Preparing Built-in CameraName of Parts for the Built-In Camera Checking the Camera’s Shooting RangeConnecting to an antenna or cable Making ConnectionsConnecting to a HD receiver, DVD Player or VCR Hdmi ConnectionHdmi is the best way to connect a device ARC Audio Return ChannelDVI to Hdmi Connection Connecting to a mobile phone MHL Cable Not Provided Mobile phoneComponent Connection Composite Connection Connecting a PC Hdmi Connection or DVI to Hdmi ConnectionChoose method a or B to make connection Method B DVI to Hdmi Connection Connecting to an Audio System Digital Optical Audio ConnectionConnecting Headphones Connecting a USB DeviceMagic Remote Control Functions Voice recognitionRegistering Magic Remote Control How to use Magic Remote ControlPrecautions to Take when Using the Magic Remote Control How to register the Magic Remote ControlWatching TV Turning the TV on for the first timeUsing the User GUIdE Specifications ModelsHdmi DTV supported mode Component supported modeComponent port connecting information Hdmi PC supported mode3D supported mode Hdmi3D supported mode manually PhotoWiDi Maintenance TroubleshootingCleaning Your TV Power cordPage Child Safety Canada Register your product OnlineExternal Control Device Setup This feature is not available for all models Volume +Volume PowerExternal Control Device Setup USB TypeRS-232C Serial portSub Communication Parameters Carriage Return Ascii code ‘0x0D’ Space Ascii code ‘0x20’Set ID C8 Step 0F Step Volume Mute Command k e Aspect Ratio Command k c Main Picture SizeVolume Control Command k f Contrast Command k gTint Command k j ColorColour Temperature Command x uSharpness Command k k OSD Select Command k lFor South Korea, North/Latin America except Colombia ModelFor Japan Model ChannelProgramme Add/DelSkip Command m b Control Back Light Command m gControl Panel Light Command m g For Plasma TV Input select Command x b Main Picture InputDCommand x t only 3D models Depending on model Extended 3DCommand x v only 3D models Depending on modelDon’t care
Top Page Image Contents