Toshiba 60PN5300 To a wall plug To the TV, To an External device To the TV, Ferrite core

ASSEMBLING AND PREPARING 9

Ferrite core

(Depending on model)

CAUTION

yyDo not use any unapproved items to ensure the safety and product life span.

yyAny damages or injuries by using unapproved items are not covered by the warranty.

yySome models appear to have a thin film on the screen. It is actually part of the screen, do not remove it.

NOTE

yyThe items supplied with your product may vary depending on the model.

yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV's USB port.

	B	B
A		A

*A 10 mm (0.39 inches) *B 18 mm (0.7 inches)

yyHow to use the ferrite core

1 Use the ferrite core to reduce the electromagnetic interference in the power cable.

Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.

[to a wall plug]		[to the TV]
[Figure 1]			(Black)
			[Cross Section of
			Ferrite Core]
2 Use the ferrite core to reduce the electromagnetic interference in the cable.
Place the ferrite core close to the TV.
Wind the component cable on the ferrite core once.
[to an External device]		[to the TV]
[Figure 2-1]	10 mm(+ / - 5 mm)
Wind the PC audio cable on the ferrite core once.			(Black)
			[Cross Section of
[to an External device]		[to the TV]	Ferrite Core]

ENGLISH

[Figure 2-2] 10 mm(+ / - 5 mm)