Tuning the television using Quick Setup,
Programme sorting
Before switching on the television put your decoder and media recorder to Standby if they are connected. To set up the television use the buttons on the remote control as detailed on page 5.
1Connect the television to the mains power. The Quick Setup screen will appear.
Quick Setup |
|
Select your language. |
|
Language | English |
EXIT Watch TV | OK Next |
2Using S or Rselect your language, then press OK.
3Then press S or Rto select your country and press OK.
4Your System will have been selected, if there is a choice, press R to select from the systems displayed.
B/G – Continental Europe, I – UK
D/K – Eastern Europe, L – France
5To start Auto tuning press OK.
Auto tuning
Searching
Channel : 3 | Station : |
EXIT Stop
6The search will begin for all available stations. The slide bar will move along the line as the search progresses.
You must allow the television to complete
the search.
When the search is complete the television will automatically select programme position 1. This may not be a clear picture or the signal may be weak, so the station order can be changed using Programme sorting which will appear on the screen.
7With the list of stations now showing use Q or P to highlight the station you want to move and press R.
The selected station will be moved to the right of the screen.
Programme sorting
Prog. | Channel | Station |
1 | C22 | BBC1 |
2 | C28 | BBC2 |
3 | C25 | ITV |
4 | C32 | CH4 |
5
C69
6
C69
Sort | Store |
MENU Back | EXIT Watch TV |
8Use Q or P to move through the list to your preferred position. As you do so the other stations will move to make room.
9Press S to store your move.
Repeat as necessary, then press EXIT.
If the television cannot be connected to a media recorder/decoder with a SCART lead or if a station on another system is required, use Manual tuning to allocate a programme position, see page 10.
9