Toshiba 30HFX85 appendix Image tilt correction, Adding channels to the TV’s memory

Image tilt correction

When you install or change the direction of the TV, the picture may become tilted (caused by the Earth’s magnetism). If this happens, use the image tilt correction feature to obtain the best possible picture.

To adjust the image tilt:

1.	Press MENU, then press			or
	until the SETUP menu appears.				SETUP
2.	Press ▲ or ▼ to highlight IMAGE				CLOSED CAPTION	OFF
	TILT.				PICTURE SIZE
					PICTURE SCROLL	VIDEO
3.	Press	or	to adjust the picture		CINEMA MODE
					ASPECT	ON
					IMAGE TILT	0
	tilt (from –10 to 10.)				:SELECT	:ADJUST

Adding channels to the TV’s memory

When you press CH ▲ or ▼, your TV will stop only on the channels you have programmed into the TV's channel memory. Follow the steps below to program channels into the channel memory.

Programming channels automatically

Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory automatically, you can add or erase channels manually.

To add channels automatically:
1.	Press MENU, then press or	to display the SETUP menu.
2.	Press ▲ or ▼ until the TV/CABLE		SETUP
	selection is highlighted.
			LANGUAGE
				ENGLISH
3.	Press or to highlight either
	TV or CABLE, depending on		ADDCTVHLOCK:SELECT/PROGRAMCABLE/ERASESET	ADDTV12:00AM:ADJUST/CABLE
	which you use.
	If you use an antenna, choose TV.
	If you use cable, choose CABLE.

4.Press ▼ until the CH PROGRAM selection is highlighted.

5.Press or to start channel programming. The TV will automatically cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory. While the TV is cycling through the channels, the message “PROGRAMMING NOW-PLEASE WAIT” appears.

6.When channel programming is complete, the message “COMPLETED” appears.

7.Press CH ▲ or ▼ to view the programmed channels.

Adding and erasing channels manually

After you have programmed the channels automatically, you can add or erase specific channels manually.

To add or erase channels manually:

1.	Select the channel you want to add or erase. If you are adding a
	channel, you must select the channel
	using the Channel Number buttons.
2.	Press MENU, then press or	to	S E T U P
			L A N G U A G E	ENGLISH
	display the SETUP menu.
			CLOCK SET	12:00AM
3.	Press ▲ or ▼ to highlight ADD/		TV / CABLE	CABLE
			CH PROGRAM
			ADD / ERASE	ADD	/ ERASE
	ERASE.		:SELECT	:ADJUST

4.Press or to select ADD or

ERASE, whichever function you want to perform.

5.Repeat steps 1-4 for other channels you want to add or erase.

25

CHANNEL

NUMBERS

MENU

CHANNEL 5∞

Safeguards Important

ToshibaWelcome to

yourConnecting TV

Remote ControlUsing the

your TVSetting up

FeaturesUsing the TV’s

Appendix

J3S40321A(E)_P16-26 25 12/07/2005, 8:42 AM