Remote control codes, Cable converter box

Programming the remote control to operate a cable converter box, satellite receiver, VCR, DVD player, or HTIB (home theater in a box)

Your Toshiba TV remote control is preprogrammed to operate most Toshiba devices. To program your TV remote control to operate a non-Toshiba device (or a Toshiba device that it is not preprogrammed to operate), follow the steps below. For details on using the remote control to operate the device, see page 14.

Using the Remote Control

RECALL

POWER

} Channel

Numbers

Device Switch

Note:

1 In the remote control code table (below and on the next page), find the code for your device. If more than one code is listed, try each one separately until you find one that works.

2 Set the Device Switch to the type of device you are programming the remote control to operateÑCBL/SAT (for a cable converter box or satellite receiver), VCR (for a VCR or TV/VCR combo), or DVD (for a DVD player or HTIB [home theater in a box]).

3 While holding down RECALL, press the Channel Number buttons to enter the 3-digit code for your device.

4 To test the code, turn on the device, point the remote control at it, and press POWER.

ÐIf the correct code was entered, the device will turn off.

ÐIf the device does not respond, repeat steps 1Ð4 using another code.

ÐIf the device does not respond to another code, you will need to use the remote control that came with the device.

Note: In addition to POWER, confirm that all necessary keys on the TV remote control operate your device. If some keys are not operational, repeat the device code setup using another code (if other codes are listed for your device). If, after trying all listed codes, the necessary keys do not operate your device, use the deviceÕs original remote control.

5 Remember to set the Device Switch back to ÒTVÓ to control the TV.

6 For future reference, write down the code(s) you used:

DEVICE	CODE	DEVICE	CODE

Each time you change the batteries, you will need to reprogram the remote control.

Some newer VCRs respond to either of two codes. These VCRs have a switch labeled “VCR1/ VCR2.” If your VCR has this kind of switch and does not respond to the codes for your VCR brand, set the switch to the other position (“VCR1” or “VCR2”) and reprogram the remote control.

Remote control codes

In some cases you may not be able to operate your device with the TV remote control. Your other device may use a code that is not recognized by the TV remote control. If this happens, you will need to use the remote control provided with the device.

Cable converter box

ABC: 061, 062, 063, 082, 084, 087, 091, 092, 096, 098

Archer: 065, 092, 097, 099

Cableview: 064, 094

Century: 092

Citizen: 090, 092, 097

Contec: 083, 085, 086, 088, 093, 098

Diamond: 093

Eagle: 091

GE: 061, 062

Gemini: 069, 070, 094

General Instruments: 062,

089, 096

Hamlin: 093

Hitachi: 062, 095, 096

Jasco: 097

Jerrold: 062, 069, 071,

082, 086, 089, 091,

096

Magnavox: 072, 096

Memorex: 091, 092, 104

Multi Canal: 090

Novavision: 101

Panasonic: 081, 083, 085

Philco: 087

Philips: 066, 067, 068,

070, 072, 073, 074,

075, 091, 092

Pioneer: 076, 077

Proscan: 061, 062

Radio Shack: 092, 097,

099

RCA: 064, 081

Realistic: 065

Recoton: 102

Samsung: 077, 090

Scientific Atlanta: 063,

078, 079, 080, 088,

098, 101, 105

Sears: 095

Signature: 062

Signature 2000: 096

Sprucer: 081, 085

Starcom: 069, 082, 087,

096, 103, 104

Stargate: 069, 090

Sylvania: 095, 100

TeleView: 090

Texscan: 100

Tocom: 071, 084, 085

U. S. Electronics: 087,

096, 098

United Cable: 082

Universal: 065, 092, 097,

099, 102, 103

Wards: 096

Satellite receiver

Alphastar: 038, 059

Chaparral: 034

DISH Network: 057

Drake: 020, 040, 044, 046,

050, 053

Echostar: 018, 041, 051

Express Vu: 057

Fujitsu: 027

GE: 008, 009, 013